ADA4627-1ARZ-RL(RevA) View Datasheet(PDF) - Analog Devices

Part Name

Description

Manufacturer

ADA4627-1ARZ-RL
(Rev.:RevA)

36 V, 19 MHz, Low Noise, Low Bias Current, JFET Operational Amplifier

Analog Devices 

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Supply Voltage

Input Voltage Range1

Input Current1

Differential Input Voltage2

Output Short-Circuit Duration to GND

Storage Temperature Range

Operating Temperature Range

Junction Temperature Range

Lead Temperature (Soldering, 60 sec)

ESD Human Body Model

Rating

36 V

(V−) − 0.3 V to (V+) + 0.3 V

±10 mA

±VSY

Indefinite

−65°C to +150°C

−40°C to +125°C

−65°C to +150°C

300°C

2.5 kV

1 Input pin has clamp diodes to the power supply pins. Input current should

be limited to 10 mA or less whenever input signals exceed the power supply

rail by 0.3 V.

2 Differential input voltage is limited to ±30 V or the supply voltage, whichever

is less.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ADA4627-1

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages. This

was measured using a standard two-layer board. For the LFCSP

package, the exposed pad should be soldered to a copper plane.

Table 4. Thermal Resistance

Package Type

θJA

θJC

8-Lead SOIC_N (R-8)

155

45

8-Lead LFCSP (CP-8-2)

77

14

Unit

°C/W

°C/W

ESD CAUTION

Rev. A | Page 5 of 16

Share Link: