AD8370AREZ-RL7 View Datasheet(PDF) - Analog Devices

Part Name

Description

Manufacturer

AD8370AREZ-RL7

LF to 750 MHz, Digitally Controlled VGA

Analog Devices 

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Supply Voltage, VS

PWUP, DATA, CLCK, LTCH

Differential Input Voltage,

VINHI – VINLO

Common-Mode Input Voltage, VINHI or

VINLO, with respect to ICOM or OCOM

Internal Power Dissipation

θJA (Exposed paddle soldered down)

θJA (Exposed paddle not soldered down)

θJC (At exposed paddle)

Maximum Junction Temperature

5.5 V

VS + 500 mV

2V

VS + 500 mV

(maximum),

VICOM – 500 mV,

VOCOM – 500 mV

(minimum)

575 mW

30°C/W

95°C/W

9°C/W

150°C

Operating Temperature Range

–40°C to +85°C

Storage Temperature Range

Lead Temperature Range

(Soldering 60 sec)

–65°C to +150°C

235°C

AD8370

Stresses above those listed under Absolute Maximum

Ratings may cause permanent damage to the device.

This is a stress rating only; functional operation of the

device at these or any other conditions above those

listed in the operational sections of this specification

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the

human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 5 of 28

Share Link: