UT63M Monolithic Transceiver, 5V Operation
UT63M- * * * *
Total Dose:
() = None
Lead Finish:
(A) = Solder
(C) = Gold
(X) = Optional
Screening:
(C) = Military Temperature
(P) = Prototype
Package Type:
(B) = 36-pin DIP
(C) = 24-pin FP
Device Type Modifier:
147 = Idle Low Transceiver
145 = 1760, Idle Low Transceiver
Notes:
1. Lead finish (A, C, or X) must be specified.
2. If an "X" is specified when ordering, part marking will match the lead finish and will be either "A" (solder) or "C" (gold).
3. Military Temperature range devices are burned-in and tested at -55°C, room temperature, and 125°C. Radiation characteristics are neither tested nor
guaranteed and may not be specified.
4. Devices have prototype assembly and are tested at 25°C only. Radiation characteristics are neither tested nor guaranteed and may not be specified.
Lead finish is GOLD only.
18