5962G9322604VXA View Datasheet(PDF) - Aeroflex UTMC
Part Name
Description
Manufacturer
5962G9322604VXA Datasheet PDF : 19 Pages
| |||
AC ELECTRICAL CHARACTERISTICS 1
VCC = 5.0V ±10%
-55°C < TC < +125°C
SYMBOL
tR, tF
PARAMETER
Transmitter output rise/
fall time (see figure 10)
MINIMUM
100
MAXIMUM
300
UNIT
ns
tRXDD
RXOUT delay
-200
tTXDD 3
TXIN skew
-25
tRZCD
Zero crossing distortion
-150
(see figure 11)
tTZCS
Zero crossing stability
-25
(see figure 11)
200
ns
25
ns
150
ns
25
ns
tRDXOFF3,4
Transmitter off; delay
from inhibit active
100
ns
tDXON 3,5
Transmitter on; delay
from inhibit inactive
150
ns
tRCVOFF 3
tRCVON 3
tRCVPD 3
Receiver off
Receiver on
Receiver propagation
50
ns
50
ns
450
ns
tXMITPD 3
Transmitter
propagation
200
ns
Notes:
1. All tests guaranteed per test figure 6.
2. Guaranteed by device characterization.
3. Supplied as a design limit but not guaranteed or tested.
4. Delay time from transmit inhibit (1.5V) rising to transmit off (280mV).
5. Delay time from not transmit inhibit (1.5V) falling to transmit off (1.2V).
CONDITION
Input ƒ = 1MHz 50% duty cycle:
direct-coupled RL = 35 ohms output
at 10% through 90% points TXOUT,
TXOUT. Figure 10.
RXOUT to RXOUT, Figure 4.
TXIN to TXIN, Figure 3.
Direct-coupled stub; input ƒ = 1MHz,
3VPP (skew INPUT ±150ns), rise/fall
time 200ns.
Input TXIN and TXIN should create
Transmitter output zero crossings at
500ns, 1000ns, 1500ns, and 2000ns.
These zero crossings should not
deviate more than ±25ns.
TXIN and TXIN toggling @ 1MHz;
TXIHB transitions from logic zero to
one, see figure 12.
TXIN and TXIN toggling @ 1MHz;
TXIHB transitions from logic one to
zero, see figure 13.
Receiver turn off time, see figure 13.
Receiver turn on time, see figure 13.
Receiver propagation delay, see
figure 13.
Transmitter propagation delay, see
figure 12.
Table 2. Transformer Requirements
COUPLING TECHNIQUE
DIRECT-COUPLED:
Isolation Transformer Ratio
TRANSFORMER-COUPLED:
Isolation Transformer Ratio
Coupling Transformer Ratio
± 5VDC
2.5:1
1.79:1
1:1.4
12
|
|
Share Link: 