5962H9651802QXX View Datasheet(PDF) - Aeroflex Corporation

Part Name

Description

Manufacturer

5962H9651802QXX

Quadruple 2-Input AND Gates

Aeroflex Corporation 

Ordering Information: UT54ACS08E and UT54ACTS08E: SMD

5962 * ***** ** * * *

Lead Finish: (Notes 1 & 2)

A = Solder

C = Gold

X = Optional

Package Type:

X = 14-lead ceramic bottom-brazed dual-in-line Flatpack

Class Designator:

Q = QML Class Q

V = QML Class V

Device Type:

02 = 1 rad(Si)/sec

03 = 50 to 300 rad(Si)/sec

Drawing Number:

96518 = UT54ACS08E

96519 = UT54ACTS08E

Total Dose: (Notes 3 & 4)

R = 1E5 rads(Si)

F = 3E5 rads(Si)

G = 5E5 rads(Si)

H = 1E6 rads(Si)

Notes:

1. Lead finish (A,C, or X) must be specified.

2. If an “X” is specified when ordering, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).

3. Total dose radiation must be specified when ordering. QML Q and QML V not available without radiation hardening. For prototype inquiries, contact

factory.

4. Device type 02 is only offered with a TID tolerance guarantee of 3E5 rads(Si) or 1E6 rads(Si) and is tested in accordance with MIL-STD-883 Test

Method 1019 Condition A and section 3.11.2. Device type 03 is only offered with a TID tolerance guarantee of 1E5 rads(Si), 3E5 rads(Si), and 5E5

rads(Si), and is tested in accordance with MIL-STD-883 Test Method 1019 Condition A.

9

Share Link: