5962F-9865103QYC View Datasheet(PDF) - Aeroflex UTMC
Part Name
Description
Manufacturer
5962F-9865103QYC Datasheet PDF : 14 Pages
| |||
OPERATIONAL ENVIRONMENT
PARAMETER
Total Ionizing Dose (TID)
Single Event Latchup (SEL)
Neutron Fluence1
Notes:1. Guarnteed but not tested.
LIMIT
1.0E6
>100
1.0E13
UNITS
rad(Si)
MeV-cm2/mg
n/cm2
ABSOLUTE MAXIMUM RATINGS1
(Referenced to VSS)
SYMBOL
PARAMETER
LIMITS
VDD
VI/O
TSTG
PD
TJ
JC
II
DC supply voltage
Voltage on any pin during operation
Voltage on any pin during cold spare
Storage temperature
Maximum power dissipation
Maximum junction temperature2
Thermal resistance, junction-to-case3
DC input current
-0.3 to 4.0V
-0.3 to (VDD + 0.3V)
-.3 to 4.0V
-65 to +150C
1.25 W
+150C
10C/W
±10mA
Notes:
1. Stresses outside the listed absolute maximum ratings may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at
these or any other conditions beyond limits indicated in the operational sections of this specification is not recommended. Exposure to absolute maximum rating conditions
for extended periods may affect device reliability and performance.
2. Maximum junction temperature may be increased to +175C during burn-in and life test.
3. Test per MIL-STD-883, Method 1012.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VDD
Positive supply voltage
TC
Case temperature range
VIN
DC input voltage
LIMITS
3.0 to 3.6V
-55 to +125C
0V to VDD
36-00-06-004
Version 1.0.1
4
Cobham Semiconductor Solutions
www.aeroflex.com/LVDS
|
|
Share Link: 