DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

0-1393304-9 View Datasheet(PDF) - TE Connectivity

Part Name
Description
Manufacturer
0-1393304-9
Te
TE Connectivity Te
0-1393304-9 Datasheet PDF : 3 Pages
1 2 3
Automotive Relays
Plug-in Maxi ISO Relays
Power Relay F7 (Continued)
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
500Vrms
500Vrms
500Vrms
Vs=+86.5VDC
Vs=+200VDC
Other Data
EU RoHS/ELV compliance
compliant
Protection to heat and fire according UL-94 HB or better7)
Ambient temperature
-40 to 125°C
Climatic cycling with condensation
EN ISO 6988 6 cycles, storage 8/16h
Temperature cycling,
IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min)
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C
Damp heat constant, IEC 60068-2-3, Ca
56 days
Category of environmental protection,
IEC 61810 RTI – dustproof, RT III – sealed
Degree of protection, IEC 60529 IP54 (dustproof), IP67 (sealed)
Corrosive gas
IEC 60068-2-42 10±2cm3/m3 SO2, 10 days
IEC 60068-2-43 1±0.3cm3/m3 H2S, 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g8)
Terminal Assignment
Other Data (continued)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
6ms, min. 30g.8)
Drop test, free fall
IEC 60068-2-32
1m onto concrete
Terminal type
plug-in, QC/ PCB
Cover retention
axial force
150N
pull force
150N
push force
150N
Terminal retention
pull force
100N
push force
100N
resistance to bending
10N9)
force applied to side
10N9)
torque
0.3Nm
Weight
approx. 38g (1.3oz)
Resistance to soldering heat THT
IEC 60068-2-20
260°C, 10s
Packaging unit
plug-in:
210 pcs.
plug-in with bracket:
208 pcs.
PCB
315 pcs.
7) Refers to used materials.
8) No change in the switching state >1μs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
Accessories
For details see datasheet Connectors for Maxi ISO Relays
NO
1 form A, NO
NOR
1 form A, NO with resistor
NOD
1 form A, NO with diode
85
87
85
87
85
87
86
30
86
30
86
30
Dimensions
Power Relay F7 with quick connect terminals similar to ISO 8092-1
25.9 ±0.3
6 ±0.4
15 ±0.1
5.3 ±0.1
4 ±0.2
16 ±0.5
25.9 ±0.3
View of the terminals (bottom view)
TE1103-411
24.9 ±0.3
11 ±0.5
17 +1/-0.5
Measurement
reference plane
4x
0.3
ø 1.7 +0.2
0.8 ±0.05
6.3 ±0.1
9.5 ±0.1
1.2 ±0.05
2
Quick connect terminal similar to ISO 8092-1
TE1098-Y1
03-2016, Rev. 0316
Catalog and product specification according
www.te.com
to IEC 61810-1 and to be used only together
© 2016 Tyco Electronics Corporation,
with the ‘Definitions’ section.
a TE Connectivity Ltd. company.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]