R2D View Datasheet(PDF) - RECOM Electronic GmbH
Part Name
Description
Manufacturer
R2D Datasheet PDF : 4 Pages
| |||
Features
Unregulated
Converters
● Fully RoHS 6/6 Conform
● Full Power at 100°C Ambient Temperature
● 1kVDC and 3kVDC Isolation Options
● /H Version Certified for Medical Applications
● UL/EN/CSA Certified, CB Report
● Suitable for Fully Automated Assembly
(including Vapor Phase Soldering)
● Optional Continuous Short Circuit Protection
● Efficiency to 85%
● Built-In EN55022 Class A Filter
Description
The R2S and R2D converters are of the enclosed open frame type, meaning that they are
un-potted. The converters are typically used in general purpose and industrial low power
isolation and voltage matching applications where an SMD converter is required.
The converter series feature an extended ambient temperature operating range of
-40°C to +100°C without derating and optional continuous short circuit protection.
In addition to two isolation options and three different case formats, the converters are also
available prepacked as tape and reel for use with automatic insertion machines.
Selection Guide
Part
Number
SMD
(3kV)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency Max
Capacitive
(%)
Load(1)
R2S**-xx3.3 (H)
5, 12, 15, 24
3.3
606
70-75 3300µF
R2S**-xx05 (H)
5, 12, 15, 24
5
400
76-84 1200µF
R2S**-xx09 (H)
5, 12, 15, 24
9
222
76-84 1200µF
R2S**-xx12 (H)
5, 12, 15, 24
12
167
76-85 680µF
R2S**-xx15 (H)
5, 12, 15, 24
15
133
76-85 680µF
R2S**-xx24 (H)
5, 12, 15, 24
24
83
76-85 220µF
R2D**-xx05 (H)
5, 12, 15, 24
±5
±200 75-80 ±470µF
R2D**-xx09 (H)
5, 12, 15, 24
±9
±111 75-80 ±470µF
R2D**-xx12 (H)
5, 12, 15, 24
±12
±83
75-83 ±330µF
R2D**-xx15 (H)
5, 12, 15, 24
±15
±66
75-85 ±330µF
R2D**-xx24 (H)
5, 12, 15, 24
±24
±42
75-85
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R2S-0505/P, R2D-0505/HP
* add suffix -R for tape&reel packing e.g. R2S-0505-R. For more details see Tapes Section.
±330µF
Case and Pinning Options (note restrictions on /H option)
R2S** : ** without marking denotes 5 pins out of 8 fitted (/H option available)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (/H option available)
R2D** : ** without marking denotes 6 pins out of 10 fitted (/H option available)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
** with marking 12 denotes with 10 pins out of 12 fitted (/H option available)
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin max.
Load Voltage Regulation
3.3V output types
20% max.
(10% to 100% full load)
5V output type
15% max.
9V, 12V, 15V, 24V output types
10% max.
Output Ripple and Noise (20MHz limited)
150mVp-p max.
Operating Frequency
20kHz min. / 40kHz typ. / 85kHz max.
Efficiency at Full Load
70% min. / 80% typ.
Minimum Load = 0%
Specifications valid for 10% minimum load only.
continued on next page
www.recom-power.com
REV: 0/2015
ECONOLINE
DC/DC-Converter
with 3 year Warranty
2 Watt
SMD Single &
Dual Output
RoHS
2011/65/EU
6/6
E358085
UL-60950-1 Certified
EN-60950-1 Certified
EN-60601-1 Certified*
(*/H suffix)
R2S-R2D
Derating-Graph
(Ambient Temperature)
100
80
60
Safe Operating Area
40
20
0
-40
0
50
100 150
Operating Temperature °C 105
***Any data referred to in this datasheet are of indicative nature
and based on our practical experience only. For further details,
please refer to our Application Notes.
Refer to Application Notes
E-85
|
|
Share Link: 