0402B104K101LG View Datasheet(PDF) - Unspecified
Part Name
Description
Manufacturer
0402B104K101LG Datasheet PDF : 17 Pages
| |||
Approval sheet
General Purpose Capacitors
11. RELIABILITY TEST CONDITIONS AND REQUIREMENTS
No. Item
1. Visual and
Mechanical
2. Capacitance
3. Q/ D.F.
(Dissipation
Factor)
Test Condition
---
Class I:NP0
Cap≤1000pF 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF 1.0±0.2Vrms, 1KHz±10%
Class II:X7R, X5R, Y5V
Cap≤10µF, 1.0±0.2Vrms, 1kHz±10%
Cap>10µF, 0.5±0.2Vrms, 120Hz±20%
Requirements
* No remarkable defect.
* Dimensions to conform to individual specification sheet.
* Shall not exceed the limits given in the detailed spec.
NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C
X7R, X5R:
Rated D.F.
vol. ≦
Exception of D.F. ≦
≧50V 2.5% 3% 0603≧0.047µF; 0805≧0.18µF;1206≧0.47µF
5% 0805≧1µF; 1210≧10µF
25V 3.5% 7% 0603≧0.33µF; 1206≧4.7µF
10%
0402≧0.10µF;0603≧0.47µF;
0805≧2.2µF; 1206≧6.8µF
16V
3.5%
5%
10%
0402≧0.033µF; 0603≧0.15µF;
0805≧0.68µF;1206≧2.2µF;1210≧4.7µF
0603≧0.68µF;0805≧2.2µF;
1206≧4.7µF;1210≧22µF
10V
5%
10%
0402≧0.33µF;0603≧0.33µF;
0805≧2.2µF;1206≧2.2µF;1210≧22µF;
15% 0201≧0.1µF; 0402≧1µF
6.3V
10%
15%
0603≧10µF; 0805≧4.7µF; 1206≧47µF;
1210≧100µF;
20% 0402≧2.2µF
Y5V:
Rated vol.
≧ 50V
35V
25V
16V
(C<1.0µF)
16V
(C≧1.0µF)
10V
6.3V
D.F.≦
5%
7%
5%
7%
9%
12.5%
20%
Exception of D.F.≦
7%
0603≧0.1µF; 0805≧0.47µF;
1206≧4.7µF
---
---
0402≧0.047µF;0603≧0.1µF;
7% 0805≧0.33µF;1206≧1µF;
1210≧4.7µF
9%
0402≧0.068µF;0603≧0.47µF;
1206≧4.7µF; 1210≧22µF
9% 0402≧0.068µF; 0603≧0.68µF
12.5% 0402≧0.22µF
0603≧2.2µF; 0805≧3.3µF;
12.5% 1206≧10µF; 1210≧22µF;
1812≧47µF
20% 0402≧0.47µF
---
---
4. Dielectric
Strength
* To apply voltage (≤100V) 250%.
* Duration: 1 to 5 sec.
* Charge and discharge current less than 50mA.
* No evidence of damage or flash over during test.
5. Insulation
Resistance
To apply rated voltage for max. 120 sec.
10GΩ or RxC≧500Ω-F whichever is smaller.
Class II (X7R, X5R, Y5V)
Rated voltage
100V: X7R
16V:0402≥0.22µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF
; 0805≥2.2µF;1206≥4.7µF;1210≥47µF
6.3V
Insulation
Resistance
10GΩ or
RxC≧100 Ω-F
whichever is
smaller.
6. Temperature
Coefficient
7. Adhesive
Strength of
Termination
With no electrical load.
T.C.
NPO
X7R
X5R
Y5V
Operating Temp
-55~125°C at 25°C
-55~125°C at 25°C
-55~ 85°C at 25°C
-25~ 85°C at 20°C
* Pressurizing force：
5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
T.C.
NPO
X7R
X5R
Y5V
Capacitance Change
Within ±30ppm/°C
Within ±15%
Within ±15%
Within +30%/-80%
* No remarkable damage or removal of the terminations.
Page 9 of 16
ASC_General Purpose_001M_DS-IBD
Apr. 2011
|
|
Share Link: 