Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MTV212MS64I View Datasheet(PDF) - Myson Century Inc

Part Name
Description
Manufacturer
MTV212MS64I Datasheet PDF : 26 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
MYSON
TECHNOLOGY
MTV212M64i
(Rev 0.9)
IVHlfH = 1
=0
HlfHE = 1
=0
HBpl = 1
=0
VBpl = 1
=0
HLFHO is inverted.
HLFHO is not inverted.
HLFHO is half freq. of HSYNC/P1.0.
HLFHO is same freq. of HSYNC/P1.0.
Negative polarity HBLANK output.
Positive polarity HBLANK output.
Negative polarity VBLANK output.
Positive polarity VBLANK output.
HVCTR2 (w) : Self-test pattern generator control.
Selft = 1 Enables generator.
= 0 Disables generator.
STF1,STF0 = 1,1 95.2KHz(horizontal)/72Hz(vertical) output selected.
= 1,0 63.5KHz(horizontal)/60Hz(vertical) output selected.
= 0,1 47.6KHz(horizontal) /60Hz(vertical) output selected.
= 0,0 31.75KHz(horizontal) /60Hz(vertical) output selected.
Rt1,Rt0 = 0,0 Positive cross-hatch pattern output.
= 0,1 Negative cross-hatch pattern output.
= 1,0 Full white pattern output.
= 1,1 Full black pattern output.
STE = 1 Enables STOUT output.
= 0 Disables STOUT output.
HVCTR3 (w) : HSYNC clamp pulse control register.
CLPEG = 1 Clamp pulse follows HSYNC leading edge.
= 0 Clamp pulse follows HSYNC trailing edge.
CLPPO = 1 Positive polarity clamp pulse output.
= 0 Negative polarity clamp pulse output.
CLPW2 : CLPW0 : Pulse width of clamp pulse is
[(CLPW2:CLPW0) + 1] x 0.167 µs for 12MHz Xtal selection.
INTFLG (w) : Interrupt flag. An interrupt event will set its individual flag, and, if the corresponding interrupt
enable bit is set, the INT1 source of 8051 core will be driven by a zero level. Software MUST
clear this register while serving the interrupt routine.
HPRchg= 1 No action.
= 0 Clears HSYNC presence change flag.
VPRchg= 1 No action.
= 0 Clears VSYNC presence change flag.
HPLchg= 1 No action.
= 0 Clears HSYNC polarity change flag.
VPLchg = 1 No action.
= 0 Clears VSYNC polarity change flag.
HFchg = 1 No action.
= 0 Clears HSYNC frequency change flag.
VFchg = 1 No action.
= 0 Clears VSYNC frequency change flag.
Vsync = 1 No action.
= 0 Clears VSYNC interrupt flag.
INTFLG (r) : Interrupt flag.
HPRchg= 1 Indicates a HSYNC presence change.
VPRchg= 1 Indicates a VSYNC presence change.
HPLchg= 1 Indicates a HSYNC polarity change.
Revision 0.9
- 14 -
2000/11/17
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]