Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MTV212MS64I View Datasheet(PDF) - Myson Century Inc

Part Name
Description
Manufacturer
MTV212MS64I Datasheet PDF : 26 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
MYSON
TECHNOLOGY
MTV212M64i
(Rev 0.9)
Hor. Total time (A)
Hor. Active time (D)
Hor. F. P. (E)
SYNC pulse width (B)
Hor. B. P. (C)
MTV212M64i Self-Test Pattern Timing
63.5KHz, 60Hz
47.6KHz, 60Hz
31.7KHz, 60Hz
Time H dots Time H dots Time H dots
15.75us 1280 21.0us 1024 31.5us 640
12.05us 979.3 16.07us 783.2 24.05us 488.6
0.2us 16.25 0.28us
12
0.45us
9
1.5us
122
2us
90
3us
61
2us 162.54 2.67us 110
4us
81.27
95.2KHz, 72Hz
Time H dots
10.5us 1600
8.03us 1224
0.14us
21
1.0us
152
1.33us 203
Time
Vert. Total time (O) 16.66ms
Vert. Active time (R) 15.65ms
Vert. F. P. (S)
0.063ms
SYNC pulse width (P) 0.063ms
Vert. B. P. (Q)
0.882ms
V lines
1024
962
3.87
3.87
54.2
Time
16.66ms
15.65ms
0.063ms
0.063ms
0.882ms
V lines
768
721.5
2.9
2.9
40.5
Time
16.66ms
15.65ms
0.063ms
0.063ms
0.882ms
V lines
480
451
1.82
1.82
25.4
Time
13.89ms
13.03ms
0.052ms
0.052ms
0.756ms
V lines
1200
1126
4.5
4.5
65
* 8 x 8 blocks of cross hatch pattern in display region.
6.7 HSYNC Clamp Pulse Output
The HCLAMP output is active by setting “HCLPE” control bit. The leading edge position, pulse width and
polarity of HCLAMP are S/W controllable.
6.8 VSYNC Interrupt
The MTV212M64i checks the VSYNC input pulse and generates an interrupt at its leading edge. The
VSYNC flag is set each time when MTV212M64i detects a VSYNC pulse. The flag is cleared by S/W writing
a "0".
Revision 0.9
- 12 -
2000/11/17
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]