S-1122 View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

S-1122

HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR

Unspecified 

0.52

2

1.36

0.52

0.2 0.3 1

1.

2.

1.

2.

3.

4.

SNT

(0.25 mm min. / 0.30 mm typ.)

(1.30 mm ~ 1.40 mm)

0.03 mm

1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).

2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm).

Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.

2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm

or less from the land pattern surface.

3. Match the mask aperture size and aperture position with the land pattern.

4. Refer to "SNT Package User's Guide" for details.

1.

(0.25 mm min. / 0.30 mm typ.)

2.

(1.30 mm ~ 1.40 mm)

No. PI006-A-L-SD-4.1

TITLE

No.

ANGLE

UNIT

SNT-6A(H)-A

-Land Recommendation

PI006-A-L-SD-4.1

mm

ABLIC Inc.

Share Link: