Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TOIM3000 View Datasheet(PDF) - Temic Semiconductors

Part Name
Description
Manufacturer
TOIM3000
Temic
Temic Semiconductors Temic
TOIM3000 Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
TOIM3000/3232
Infrared IrDA Integrated Interface Circuits
ULC-Technology: High-performance gate array package using dual metal layer CMOS technology, featuring
sub-micronic channel length (0.8 mm)
Description
The TOIM3xxx series ICs provide proper timing for the
front end infrared transceiver TFDS3000, as specified by
the IrDA standard. In the transmit mode, the TOIM3xxx
provides IrDA-compatible electrical pulses to the in-
frared transceiver TFDS3000 on logic LOW electrical
input. In the receive mode, the TOIM3xxx stretches re-
ceived infrared pulses to the proper bit width at the
operating bit rate. The IrDA bit rate varies from 2.4 to
115.2 kbit/s.
D For the UART interface, the TOIM3000 uses the
1.8432 MHz clock input as the fast clock and the baud
clock output from the UART to do the pulse stretching
and shortening. The baud clock is 16 times the baud
rate. The output pulses are fixed at 1.627 ms or 3/16 of
bit time.
D For the RS232 interface, the TOIM3232 uses an exter-
nal crystal clock 3.6864 MHz for its pulse stretching
and shortening. The TOIM3232 is programmable to
operate from 1200 bit/s to 115.2 kbit/s by the commu-
nication software through the RS232 port. Output
pulses are software-programmable as either 1.627 ms
or 3/16 of bit time.
The typical power consumption of both circuits is very
low with about 10 mW in operational state. It is in the or-
der of magnitude of microwatts in standby mode.
Features
TOIM3000
D Pulse shaping function (shortening and stretching)
used in infrared IrDA standard applications
D Directly interfaces the infrared transceiver
TFDS3000*) to a UART or a microcontroller
D 3 V and 5 V operation with low operating current
D SO16L package
*) TFDS3000 is an infrared IrDA transceiver made by TEMIC
Block Diagrams
TOIM3232
D Pulse shaping function (shortening and stretching)
used in infrared IrDA standard applications
D Directly interfaces the infrared transceiver
TFDS3000*) to an RS232 port
D Programmable baud clock generator
(1200 Hz 115 kHz), 13 baud rates
D 3 V and 5 V operation
D SO16L package
XIN
B_CLK
VCC
Pulse
shaper
TD_UART
RD_UART
RESET
TOIM3000
GND
TD_IR
RD_IR
TD_232
RD_232
TD_232
RD_232
BR/D
RESET
VCC
Pulse
shaper
Baud
clock
generator
TD_IR
RD_IR
TD_LED
RD_LED
S1
S2
TOIM3232
GND X1
X2
3.6864 MHz
TELEFUNKEN Semiconductors
1 (9)
Rev. A4, 26-Mar-96
Preliminary Information
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]