SA5.0 THRU SA170CA
GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts
Dimensions in inches and (millimeters)
500w peak pulse power capability
Excellent clamping capability
Low incremental surge resistance
Fast response time:typically less than 1.0ps from 0v to
VBR for unidirectional and 5.0ns ror bidirectional types.
High temperature soldering guaranteed:
265 C/10S/9.5mm lead length at 5 lbs tension
Case: JEDEC DO-15 molded plastic body over
Terminals: Plated axial leads, solderable per MIL-STD 750
Polarity: Color band denotes cathode except for
Mounting Position: Any
Weight: 0.014 ounce,0.40 grams
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types SA5.0 thru types SA170 (e.g. SA5.0CA,SA170CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 C ambient temperature unLess otherwise specified.
Peak power dissipation
Peak polse reverse current (Note 1, Fig.3)
Steady state power dissapation (Note 2)
Peak forward surge current (Note 3)
Maximum instantaneous forward voltage at 35A
for unidirectional only
Operating junction and storage temperature range
See Table 1
-55 to + 175
1.10/1000ms waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2
2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (40x40mm)Fig.5
3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.