MA4P1200-401T View Datasheet(PDF) - Tyco Electronics

Part Name

Description

Manufacturer

MA4P1200-401T

High Power PIN Diodes

Tyco Electronics 

MA4P MELF & HIPAX™Series

High Power PIN Diodes

V14

Axial Leaded HIPAX Assembly Recommendations

♦ Bends on case styles 401 and 402, axially leaded devices, must be made while holding the lead firm and forming the

bend no closer than .060 inches from the body of the part. Bending the lead < 0.060 inches from the body of the part

is not recommended and may cause internal damage to the chip. Appropriate fixturing should be used.

♦ Devices may be soldered using standard 60Sn/40Pb or any RoHS compliant solders. Axial leads are tin plated 50μm

thick to ensure an optimum connection.

♦ For recommended Sn/Pb and RoHS soldering profiles see page 7 of Application Note M538 on the M/A-COM Tech-

Case Style 401 & 402

Minimum Bend Distance

Case Style 401 & 402

Internal Construction

Cathode Band

Passivated Chip

.060” Min

.060” Min

Ordering Information

Axial leaded diodes are available in tape and reel or bulk in quantities shown in the table below

Package Style

Quantity Per Reel

Bulk Devices Per Bag

401T

500 or 1000 (specify qty. when ordering)

N/A

402

N/A

100

Environmental Ratings

HIPAX PIN diodes are designed to meet most environmental and electrical requirements and may be ordered

screened to MIL-STD-750 specifications as described in the table below.

TEST

Moisture Resistance

High Temperature Storage

HTRB

Temperature Shock

Fine Leak

Constant Acceleration

Solderability

Tension1

Lead Fatigue1

METHOD

1021

1031

1038

1051

1071 Cond. H

2006

2026

2036.3 Cond. A

2036.3 Cond. E

DESCRIPTION/ CONDITIONS

85°C, 85% Relative Humidity, 168 hrs

+175°C , 250 Hours

80% of rated VR, 50°C, 96 Hours

-65°C to +175°C, 20 Cycles

1 X 10-7 CC/Sec

20,000 G’s

IPC/JDEC J-STD-02

2 Lbs., 30 Seconds

3 Cycles, 8 oz., 90°,

Note:

1) Test applicable to HIPAX axially leaded devices only.

12 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Visit www.macomtech.com for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.

changes to the product(s) or information contained herein without notice.

Share Link: