QL6325E Eclipse-E Data Sheet Rev. F
Figure 32: RAM Cell Synchronous Write Timing
WCLK
WA
WD
WE
RD
tSWA
tHWA
tSWD
tHWD
tSWE
old data
tHWE
tWCRD
new data
Table 16: RAM Cell Synchronous and Asynchronous Read Timing
Symbol
Parameter
RAM Cell Synchronous Read Timing
tSRA
RA setup time to RCLK: time the READ ADDRESS must be stable before the
active edge of the READ CLOCK
tHRA
RA hold time to RCLK: time the READ ADDRESS must be stable after the active
edge of the READ CLOCK
tSRE
RE setup time to WCLK: time the READ ENABLE must be stable before the active
edge of the READ CLOCK
tHRE
RE hold time to WCLK: time the READ ENABLE must be stable after the active
edge of the READ CLOCK
tRCRD
RCLK to RD: time between the active READ CLOCK edge and the time when the
data is available at RD
RAM Cell Asynchronous Read Timing
rPDRD
RA to RD: time between when the READ ADDRESS is input and when the DATA
is output
Value
Min
Max
0.43 ns
-
0 ns
-
0.21 ns
-
0 ns
-
-
2.25 ns
-
1.99 ns
© 2005 QuickLogic Corporation
www.quicklogic.com
•
•••
••
29