5962F9466311QXC View Datasheet(PDF) - Aeroflex UTMC

Part Name

Description

Manufacturer

5962F9466311QXC

Enhanced SuMMIT XTE MIL-STD-1553 dual redundant bus controller/remote terminal/monitor/transceiver multichip module SMD. Lead finish gold. Class Q. Device type 09 (SuMMIT XTE 5V/12V). Radiation none.

Aeroflex UTMC 

3.1.9 Command Block Pointer Register (Read/Write) - Register 8

This register contains the location to start the Command Blocks. After execution begins, this register is automatically updated with

the address of the next block.

Bit

Number

15-0

Mnemonic

CBA(15:0)

Description

Command Block Address. These bits indicate the starting location of the Command Block.

3.1.10 BC Command Block Initialization Count Register (Read/Write)-Register 10

This register contains the number of command blocks that will be initialized when using the auto-initialize feature. If 0000 (hex)

is written into this register, then NO blocks will be set up. Because each Command Block requires eight contiguous memory locations,

the largest value allowed in this register is 1FFF (hex). If a larger value is written into this register, the SBC ignores the three most

significant bits.

Bit

Number

15-0

Mnemonic

CBC(15:0)

Description

Command Block Count. These bits indicate the number of Command Blocks set up during

auto-initialization.

S MMIT FAMILY

41

Share Link: