DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

3-1393272-2 View Datasheet(PDF) - TE Connectivity

Part Name
Description
Manufacturer
3-1393272-2
Te
TE Connectivity Te
3-1393272-2 Datasheet PDF : 4 Pages
1 2 3 4
n Limiting continuous current 20A
n 24VDC coil versions available
Automotive Relays
PCB Relays
Mini Relay K (Open – Sealed)
Typical applications
Car alarm, hazard warning signal, heated rear screen, immobilizer, lamps
front/rear, fog light, interior lights, sun roof, turn signal, wiper control.
F072A/C_fcw2b
Contact Data
Load resistive/inductive
resistive/inductive
resistive/inductive
head/indicator
head/indicator
load
load
load
lamp
lamp
V23072-C10**-A302 V23072-C10**-A303 V23072-C10**-A308 V23072-C1061-A402 V23072-C1061 A408
Contact arrangement 1 form A, 1 NO
1 form C, 1 CO
1 form U/X, 2 NO
1 form A, 1 NO
1 form U/X, 2 NO
Rated voltage
12VDC
12VDC
12VDC
12VDC
12VDC
Rated current
15A
10/15A
2x10A
12A
2x6A
Limiting continuous current
23°C 15A
10/15A
2x10A
12A
2x6A
85°C 10A
5/10A
2x6A
10A
2x5A
Limiting making current1)2)
60A
NC/NO 12/60A
2x40A
60A3)
120A3)
Limiting breaking current
20A
10/20A
2x20A
6A
12A
Contact material AgNi0.15
AgNi0.15
AgNi0.15
AgSnO.2
AgSnO.2
Min. recommended contact load 4) 1A at 5VDC
1A at 5VDC
1A at 5VDC
1A at 5VDC
1A at 5VDC
Initial voltage drop at 10A, typ./max.
50/300mV
50/300mV
2x50/300mV
150/300mV
150/300mV
Operate/release time max.
typ. 3/1.5ms5)
Electrical endurance >2x105 ops.
>2x105 ops.
>2x105 ops.
>1x106 ops.
>1.5 x 106 ops.
at 13.5VDC, 10A
at 13.5VDC, 10A
at 13.5VDC, 10A
up to 6x21W
up to 6x21W
>1.5x105 ops.
>7.5x105 ops.
100A (on), 10 A (off) 100A (on), 10A (off)
high beam
high beam
1) The values apply to a resistive load or inductive load with suitable spark suppression and at maximum 13.5VDC for 12VDC and 27VDC for 24VDC load voltages.
2) For a load current duration of maximum 3s for a make/break ratio of 1:10.
3) Corresponds to the peak inrush current on initial actuation (cold filament).
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding (monostable version only).
Max. DC load breaking capacity
Load limit curve 1: safe shutdown, connected as form X, load on pin 5 and 7.
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curve 3: arc extinguishes during transit time (CO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
09-2014, Rev. 0914
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]