DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

QL6325-6PT208C View Datasheet(PDF) - QuickLogic Corporation

Part Name
Description
Manufacturer
QL6325-6PT208C
QuickLogic
QuickLogic Corporation QuickLogic
QL6325-6PT208C Datasheet PDF : 73 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Eclipse Family Data Sheet Rev. F
Bypass Instruction. The Bypass instruction allows data to skip a device's boundary scan entirely, so the
data passes through the bypass register. The Bypass instruction allows users to test a device without passing
through other devices. The bypass register is connected between the TDI and TDO pins, allowing serial data
to be transferred through a device without affecting the operation of the device.
JTAG BSDL Support
• BSDL-Boundary Scan Description Language
• Machine-readable data for test equipment to generate testing vectors and software
• BSDL files available for all device/package combinations from QuickLogic
• Extensive industry support available and Automatic Test-vector Generation (ATG)
Security Fuses
There are two security links: one to disable reading logic from the array, and the second to disable JTAG access
to the device. Programming these optional links completely disables access to the device from the outside
world and provides an extra level of design security not possible in SRAM-based FPGAs. The option to
program these fuses is selectable via QuickWorks in the Tools/Options/Device Programming window in
SpDE.
Flexibility Fuse
The flexibility link enables Power-Up loading of the Embedded RAM blocks. If the link is programmed, the
Power Up Loading state machine is activated during power-up of the device. The state machine communicates
with an external EPROM via the JTAG pins to download memory contents into the on-chip RAM. If the link
is not programmed, Power-Up Loading is not enabled and the JTAG pins function as they normally would.
The option to program this bit is selectable via QuickWorks in the Tools/Options/Device Programming
window in SpDE. For more information on Power-Up Loading refer to QuickLogic Application Note 55 at
http://www.quicklogic.com/images/appnote55.pdf.
16
•••
••
www.quicklogic.com
© 2007 QuickLogic Corporation
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]