Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

T89C51RD2-DDFC-L View Datasheet(PDF) - Atmel Corporation

Part Name
Description
Manufacturer
T89C51RD2-DDFC-L
Atmel
Atmel Corporation Atmel
T89C51RD2-DDFC-L Datasheet PDF : 86 Pages
First Prev 41 42 43 44 45 46 47 48 49 50 Next Last
T89C51RD2
6.12. Reduced EMI Mode
The ALE signal is used to demultiplex address and data buses on port 0 when used with external program or data
memory. Nevertheless, during internal code execution, ALE signal is still generated. In order to reduce EMI, ALE
signal can be disabled by setting AO bit.
The AO bit is located in AUXR register at bit location 0. As soon as AO is set, ALE is no longer output but
remains active during MOVX and MOVC instructions and external fetches. During ALE disabling, ALE pin is
weakly pulled high.
Table 24. AUXR Register
AUXR - Auxiliary Register (8Eh)
7
6
5
4
3
2
1
0
-
-
M0
-
XRS1
XRS0
EXTRAM
AO
Bit
Number
7
Bit
Mnemonic
Description
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
6
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
5
M0
M0 bit: Pulse length in clock period
Stretch MOVX control: the RD/ and the WR/ pulse length is increased according to the value of M0. see table 6
4
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
3
XRS1
XRS1 bit
XRAM size: Accessible size of the XRAM. See Table 6.
2
XRS0
XRS0 bit
XRAM size: Accessible size of the XRAM. Table 6.
1
EXTRAM
EXTRAM bit
See Table 6.
ALE Output bit
0
AO
Clear to restore ALE operation during internal fetches.
Set to disable ALE operation during internal fetches.
Reset Value = XX0X 1000b
Not bit addressable
Rev. F - 15 February, 2001
46
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]