RP08-2405DAW View Datasheet(PDF) - RECOM Electronic GmbH
Part Name
Description
Manufacturer
RP08-2405DAW Datasheet PDF : 7 Pages
| |||
RP08-AW
DC/DC Converter
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted
Series
PROTECTIONS
Parameter
Short Circuit Protection (SCP)
Over Voltage Protection (OVP)
Over Load Protection (OLP)
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Condition
3.3Vout
5Vout
Single Output 12Vout
15Vout
% of Iout rated
I/P to O/P
DIP24 I/P (O/P) to case
SMD I/P to O/P
I/P (O/P) to case
500VDC
Value
continuous, automatic recovery
3.9VDC typ.
6.2VDC typ.
15VDC typ.
18VDC typ.
150% typ.
1.6kVDC/1 minute
1.6kVDC/1 minute
1.6kVDC/1 minute
1.0kVDC/1 minute
1GΩ min.
1500pF max.
Notes:
Note5: This power module is not internally fused. An input line fuse must always be used.
ENVIRONMENTAL
Parameter
Operating Temperature Range(6)
Maximum Case Temperature
Temperature Coefficient
Thermal Impedance
Operating Humidity
Shock
Thermal Shock
Vibration
MTBF
Condition
without derating
with derating
Natural convection (20LFM)
non-condensing
MIL-HDBK-217F
Bellcore-TR-NWT-000332(7)
Value
-40°C to +85°C
-40°C to +105°C
+105°C
±0.02%/°C max.
20°C/Watt
5% - 95% RH
MIL-STD-810F
MIL-STD-810F
MIL-STD-810F
2832 x 103 hours
2350 x 103 hours
Derating Graph(8)
RP08-4805SAW
100
80
60
40
PD-4
20
0
-40 -20 0 20 40 60 80 100 120
85 105
Ambient Temperature [°C]
Notes:
Note6: Converter can meet the railway T2 and TX temperature requirement
Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground Benign and controlled environment).
MIL-HDBK-217F, Notice 2, Full Load, 25°C, Ground Benign.
Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-
number not shown here please contact our technical support service at techsupportAT@recom-power.com.
REV.: 2/2016
www.recom-power.com
|
|
Share Link: 