SAB-C513A-LM View Datasheet(PDF) - Infineon Technologies
Part Name
Description
Manufacturer
SAB-C513A-LM Datasheet PDF : 72 Pages
| |||
C517A
Timer / Counter 0 and 1
Timer/Counter 0 and 1 can be used in four operating modes as listed in table 4 :
Table 4
Timer/Counter 0 and 1 Operating Modes
Mode Description
0
8-bit timer/counter with a
divide-by-32 prescaler
1
16-bit timer/counter
2
8-bit timer/counter with
8-bit autoreload
3
Timer/counter 0 used as one
8-bit timer/counter and one
8-bit timer
Timer 1 stops
TMOD
M1 M0
0
0
1
1
1
0
1
1
Input Clock
internal
external (max)
fOSC/12x32
fOSC/24x32
fOSC/12
fOSC/24
In the “timer” function (C/T = ‘0’) the register is incremented every machine cycle. Therefore the
count rate is fOSC/12.
In the “counter” function the register is incremented in response to a 1-to-0 transition at its
corresponding external input pin (P3.4/T0, P3.5/T1). Since it takes two machine cycles to detect a
falling edge the max. count rate is fOSC/24. External inputs INT0 and INT1 (P3.2, P3.3) can be
programmed to function as a gate to facilitate pulse width measurements. Figure 10 illustrates the
input clock logic.
f OSC
÷12
P3.4/T0
P3.5/T1
max f OSC/24
TR 0/1
TCON
P3.2/INT0
P3.3/INT1
Gate
=1
TMOD
Figure 10
Timer/Counter 0 and 1 Input Clock Logic
C/T
TMOD
0
1
&
Control
1
MCS01768
Semiconductor Group
29
f OSC/12
Timer 0/1
Input Clock
|
|
Share Link: 