IDT70121S45JG View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
Manufacturer
IDT70121S45JG
Integrated Device Technology
IDT70121S45JG Datasheet PDF : 15 Pages
| |||
IDT70121/IDT70125
High-Speed 2K x 9 Dual-Port Static RAM with Busy & Interrupt
Ordering Information
IDT XXXXX X XXX X
X
Device Power Speed Package
Type
X
Process/
Temperature
Range
Industrial and Commercial Temperature Ranges
Blank Commercial (0°C to +70°C)
I (1)
Industrial (-40°C to +85°C)
G
Green
J
52-pin PLCC (J52-1)
,
25
Commercial Only
35
Commercial & Industrial
45
Commercial Only
Speed in nanoseconds
55
Commercial Only
L
Low Power
S
Standard Power
70121 18K (2K x 9-Bit) MASTER Dual-Port RAM
w/ Interrupt
70125 18K (2K x 9-Bit) SLAVE Dual-Port RAM
NOTE:
w/ Interrupt
2654 drw 15
1. Industrial temperature: for other speeds, packages and powers contact your sales office.
Datasheet Document History
01/06/99:
Initiated datasheet document history
Converted to new format
Cosmetic and typographical corrections
Pages 2 and 3 Added additional notes to pin configurations
06/03/99:
Changed drawing format
Page 1
Corrected DSC number
05/28/04:
Page 3
Changed storage temperature parameter from -55 to +125 to -65 to +150
Clarified TA parameter footnote
Page 4
DC Electrical parameters–changed test condition wording from "open" to "disabled"
Page 9
Changed ±500mV to 0mV in notes
Page 2
Added date revision for pin configuration
Page 4, 6, 8,10&12 Added Industrial temp to column headings for 35ns speed to DC and AC Electrical Characteristics
Page 4
Removed Industrial temp from 25, 45 & 55ns speeds from DC Electrical Characteristics
Page 3, 4, 6, 8,10&12 Removed Industrial temp footnote from all tables
Page 10
Corrected error in AC BUSY timing tables changing 71V33 to 70121 and changing 71V43 to 70125
Page 15
Added Industrial temp offering to 35ns ordering information
Page 1 & 15
Replaced old TM logo with new TM logo
Page 6
Page 1
Footnote reference 5 removed from AC Electrical Characteristics READ table
Changed wording of footnote 1 from "INT is totem-pole output" to "INT is non-tr-stated push-pull output"
Page 5
Updated AC Test Conditions Input Rise/Fall Times from 5ns to 3ns
04/05/06:
Page 1
Added green availability to features
Page 15
Added green indicator to ordering information
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
15
for Tech Support:
408-284-2794
DualPortHelp@idt.com
APRIL 05, 2006
|
|
Share Link: