CHV2243A View Datasheet(PDF) - United Monolithic Semiconductors

Part Name

Description

Manufacturer

CHV2243A

Fully Integrated Q-band VCO based on Ku-band Oscillator and Q-band Multiplier (GaAs Monolithic Microwave IC)

United Monolithic Semiconductors 

Q-band VCO

Typical Assembly and Bias Configuration

DC and control lines

-V

+V

V_tune

>= 120pF

>= 120pF

CHV2243a

1 2 345 6 78

9

15

10 11

12

13

14

microstrip line

L_out

L_ aux

microstrip line

This drawing shows an example of assembly and bias configuration. All the

transistors are internally self biased. The positive and negative voltages can be

respectively connected together (see drawing) according to the recommended

values given in the electrical characteristics table.

For the RF pads the equivalent wire bonding inductance (diameter=25µm) has to

be according to the following recommendation.

Port

RF_out (13)

VCO_out_aux (15)

Equivalent inductance

(nH)

L_out = 0.28

L_aux = 0.4

Approximated wire

length (mm)

0.35

0.5

For a micro-strip configuration a hole in the substrate is recommended for chip

assembly.

Ref. : DSCHV2243a7310 - 06 Nov 07

5/6

Specifications subject to change without notice

Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE

Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09

Share Link: