ADG802BRT-REEL7 View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
ADG802BRT-REEL7 Datasheet PDF : 16 Pages
| |||
Data Sheet
TERMINOLOGY
VDD
The most positive power supply potential.
IDD
Positive supply current.
GND
Ground (0 V) reference.
S
The source terminal can be an input or an output.
D
The drain terminal can be an input or an output.
IN
Logic control input.
VD (VS)
Analog voltage on Terminal D and Terminal S.
RON
Ohmic resistance between Terminal D and Terminal S.
RFLAT(ON)
The difference between the maximum and minimum value of
on resistance as measured over the specified analog signal range.
IS (Off)
Source leakage current with the switch off.
ID (Off)
Drain leakage current with the switch off.
ID, IS (On)
Channel leakage current with the switch on.
VINL
Maximum input voltage for Logic 0.
VINH
Minimum input voltage for Logic 1.
ADG801/ADG802
IINL (IINH)
Input current of the digital input.
CS (Off)
The off switch source capacitance is measured with reference
to ground.
CD (Off)
The off switch drain capacitance is measured with reference
to ground.
CD, CS (On)
The on switch capacitance is measured with reference
to ground.
CIN
Digital input capacitance.
tON
The delay between applying the digital control input and when
the output switches on. See Figure 16.
tOFF
The delay between applying the digital control input and when
the output switches off.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
Rev. B | Page 9 of 16
|
|
Share Link: 