ID, IS (ON)
CD, CS (ON)
Most Positive Power Supply Potential
Positive Supply Current
Ground (0 V) Reference
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Logic Control Input
Analog Voltage on Terminals D and S
Ohmic Resistance Between D and S
The difference between the maximum and minimum value of On Resistance as measured over the specified
analog signal range.
Source Leakage Current with the Switch OFF
Drain Leakage Current with the Switch OFF
Channel Leakage Current with the Switch ON
Maximum Input Voltage for Logic “0”
Minimum Input Voltage for Logic “1”
Input Current of the Digital Input
OFF Switch Source Capacitance. Measured with reference to ground.
OFF Switch Drain Capacitance. Measured with reference to ground.
ON Switch Capacitance. Measured with reference to ground.
Digital Input Capacitance
Delay between applying the Digital Control Input and the Output Switching ON. See Test Circuit 4.
Delay between applying the Digital Control Input and the Output Switching OFF.
A measure of the glitch impulse transferred from the Digital Input to the Analog Output during switching.
A measure of unwanted signal coupling through an OFF switch.
The frequency at which the output is attenuated by 3 dBs.
The frequency response of the ON switch
The loss due to the On Resistance of the switch