MAX2700 View Datasheet(PDF) - Maxim Integrated
Part Name
Description
Manufacturer
MAX2700 Datasheet PDF : 28 Pages
| |||
1.8GHz to 2.5GHz Direct Downconversion
Receivers
ABSOLUTE MAXIMUM RATINGS
VCC to GND ..............................................................-0.3V to +6V
RF Signals
PRFIN, PLNAIN, PLO .....................................................+15dBm
Baseband Signals
IIN1+ to IIN1-, IIN2+ to IIN2-,
QIN1+ to QIN1-, QIN2+ to QIN2- ......................................±2V
Input Voltages
AGC, GAIN_SET, SHDN, X2_EN,
CEXT_, RFIN_, LO, LNAIN, IIN_ _,
QIN_ _ , DCI_ _ , DCQ_ _ to GND ..........-0.3V to (VCC + 0.3V)
Input Current
AGC……………………………………………………..±50mA
All Digital Inputs………………………………………..±10mA
Continuous Power Dissipation (TA = +70°C)
48-Pin TQFP-EP (derate 27mW/°C above +70°C) .....2000mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(MAX2700/MAX2701 EV kit (Figure 3), VCC = +2.7V to +3.3V, SHDN = GAIN_SET = VCC, X2_EN = GND, VAGC = 1.25V, CEXT+ con-
nected to CEXT-; no RF input signals applied; RFIN, LNAIN, LO inputs are terminated with 50Ω, LNAOUT connected to VCC through a
10nH inductor; MIX_I, MIX_Q, QIN1+, QIN1-, QOUT1, IIN1+, IIN1-, IOUT1, QIN2+, QIN2-, QOUT2, IIN2+, IIN2-, IOUT2 pins are
unconnected; TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = +3.0V, TA = +25°C.)
PARAMETERS
CONDITIONS
MIN TYP MAX UNITS
SUPPLY
Supply Voltage
2.7
3.3
V
Operating Supply Current
Shutdown Supply Current
CONTROL INPUTS/OUTPUTS
TA = +25°C
LNA
enabled
LNA
disabled
TA = -40°C to +85°C
LNA
enabled
LNA
disabled
SHDN = GND, VAGC = 0.5V
MAX2700
MAX2701
MAX2700
MAX2701
MAX2700
MAX2701
MAX2700
MAX2701
165 215
167 220
155 200
156 205
mA
230
235
210
215
20
100
µA
Input Logic Voltage High
2
V
Input Logic Voltage Low
SHDN, X2_EN, GAIN_SET
0.6
V
-1
0.5
Input Bias Current
AGC, +0.5 < VAGC < +2.0V
AGC, VAGC = 0.5V, SHDN = GND
MIX_I, MIX_Q
-22
12
µA
-2
2
1.2
DC Output Voltage
IOUT1, QOUT1
IOUT2, QOUT2
1.1
V
1.25
2 _______________________________________________________________________________________
|
|
Share Link: 