5962G8957701VYA View Datasheet(PDF) - Aeroflex UTMC

Part Name

Description

Manufacturer

5962G8957701VYA

BCRTM

Aeroflex UTMC 

11.0 DC ELECTRICAL CHARACTERISTICS

(VDD = 5.0V ± 10%; -55°C < TC < + 125°C)

SYMBOL

VIL

Rad and

Non-Rad

VIH

Non-Rad

PARAMETER

Low-level input voltage

TTL inputs

High-level input voltage

TTL inputs

VIH

Rad-Hard

High-level input voltage 6

TTL inputs 7

CONDITION

MINIMUM MAXIMUM UNIT

0.8

V

2.0

V

2.2

V

IIN

Non-Rad

Input leakage current

TTL inputs

Inputs with pull-up resistors

Inputs with pull-up resistors

VIN = VDD or VSS

VIN = VDD

VIN = VSS

-1

-1

µA

-1

-1

µA

-550

-80

µA

IIN

Rad-Hard

VOL1

VOH1

Input leakage current

TTL7

Inputs with pull-up resistors

Inputs with pull-up resistors

Low-level output voltage

TTL outputs

High-level output voltage

TTL outputs

VIN = VDD or VSS

VIN = VDD

VIN = VSS

IOL = 3.2mA

IOH = -400µA

-10

10

µA

-10

10

µA

-900

-150

µA

0.4

V

2.4

V

IOZ

Three-state output leakage current

TTL outputs

VO = VDD or VSS

-10

IOS

Short-circuit output current 1, 2

VDD = 5.5V, VO = VDD

VDD = 5.5V, VO = 0V

-110

CIN

Input capacitance 3

ƒ = 1MHz @ 0V

COUT

Output capacitance 3

ƒ = 1MHz @ 0V

CIO

Bidirect I/O capacitance 3

ƒ = 1MHz @ 0V

IDD

Average operating current 1, 4

ƒ = 12MHz, CL = 50pF

QIDD

Quiescent current8

See Note 5, Tc = +125oC

Tc = 25oC, -55oC

10

µA

110

mA

mA

10

pF

15

pF

20

pF

50

mA

1

mA

35

µA

Notes:

1. Supplied as a design limit, but not guaranteed or tested.

2. Not more than one output may be shorted at a time for a maximum duration of one second.

3. Measured only for initial qualification, and after process or design changes which may affect input/output capacitance.

4. Includes current through input pull-up. Instantaneous surge currents on the order of 1 ampere can occur during output switching.

Voltage supply should be adequately sized and decoupled to handle a large current surge.

5. All inputs with internal pull-ups should be left floating. All other inputs should be tied high or low.

6. Functional tests are conducted in accordance with MIL-STD-883 with the following input test conditions

VIH = VIH(min) +20%, -0%; VIL = VIL(max) +0%, -50%, as specified herein, for TTL-compatible inputs.

Devices may be tested using input voltage within the above specified range, but are guaranteed to VIH(min) and VIL(max).

7. To 1.0E6 total dose; above this level, CMOS I/Os required.

8. Guaranteed to pre- and post-irradiation limits.

BCRTM-41

Share Link: