5962F9658601QCX View Datasheet(PDF) - Aeroflex UTMC

Part Name

Description

Manufacturer

5962F9658601QCX

Hex Buffers/Line Drivers with Three-State Outputs

Aeroflex UTMC 

UT54ACS365/UT54ACTS365: SMD

5962 * ***** ** * * *

Lead Finish: (Notes 1 & 2)

A = Solder

C = Gold

X = Optional

Package Type:

X = 16-lead ceramic bottom-brazed dual-in-line Flatpack

C = 16-lead ceramic side-brazed dip

Class Designator:

Q = QML Class Q

V = QML Class V

Device Type:

01

Drawing Number:

96586 = UT54ACS365

96587 = UT54ACTS365

Total Dose: (Notes 3 & 4)

R = 1E5 rads(Si)

F = 3E5 rads(Si)

G = 5E5 rads(Si)

H = 1E6 rads(Si)

Notes:

1. Lead finish (A,C, or X) must be specified.

2. If an “X” is specified when ordering, part marking will match the lead finish and will be either “A” (solder) or “C” (gold).

3. Total dose radiation must be specified when ordering. QML Q and QML V not available without radiation hardening. For prototype inquiries, contact factory.

4. Device type 02 is only offered with a TID tolerance guarantee of 3E5 rads(Si) or 1E6 rads(Si) and is tested in accordance with MIL-STD-883 Test Method 1019

Condition A and section 3.11.2. Device type 03 is only offered with a TID tolerance guarantee of 1E5 rads(Si), 3E5 rads(Si), and 5E5 rads(Si), and is tested in

accordance with MIL-STD-883 Test Method 1019 Condition A.

9

Share Link: