MTV130P View Datasheet(PDF) - Myson Century Inc
Part Name
Description
Manufacturer
MTV130P Datasheet PDF : 18 Pages
| |||
MYSON
TECHNOLOGY
MTV130
Fonts designed to be 12x18 display
Output display if FSS=0; first and last lines omitted
FIGURE 7. 12x18 and 12x16 Fonts
DWE - Enable double width. When the bit is set to “1”, the display of OSD menu can change to half resolution
for double character width, and then the number of pixels of each line should be even. The initial value
is 0 after power up.
HSP -
= 1 ⇒ Accept positive polarity Hsync input.
= 0 ⇒ Accept negative polarity Hsync input.
VSP -
= 1 ⇒ Accept positive polarity Vsync input.
= 0 ⇒ Accept negative polarity Vsync input.
PWM1, PWM0 - Select the PWMCK output frequency.
= (0, 0) ⇒ XIN frequency /8
= (0, 1) ⇒ XIN frequency /4
= (1, 0) ⇒ XIN frequency /2
= (1, 1) ⇒ XIN frequency /1
The initial value is (0, 0) after power up.
Notes : When XIN is not present, don’t write data in any address. If data is written in any other address, a
malfunction may occur.
TABLE 5. PWMCK Frequency and PWMDA sampling rate
(PWM1, PWM0)
( 0, 0 )
( 0, 1 )
( 1, 0 )
( 1 ,1 )
PWMCK Freq
XIN frequency /8
XIN frequency /4
XIN frequency /2
XIN frequency /1
PWMDA sampling rate
XIN frequency /(8 * 256)
XIN frequency /(4 * 256)
XIN frequency /(2 * 256)
XIN frequency /(1 * 256)
B7
b6
b5
b4
b3
b2
b1
b0
Column 19
-
-
-
-
-
CSR CSG CSB
CSR, CSG, CSB - Define the color of bordering or shadowing on characters. The initial value is (0, 0, 0) after
power up.
B7
b6
b5
b4
b3
b2
b1
b0
Column 20 FSW
-
-
-
-
FSR FSG FSB
FSW - Enable full screen self-test pattern and force the FBKG pin output to high to disable video RGB while
this bit is set to "1". The self-test pattern’s color is determined by (FSR, FSG, FSB) bits.
Revision 1.0
11/18
28/April/2000
|
|
Share Link: 