Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P5200 View Datasheet(PDF) - Conexant Systems

Part NameDescriptionManufacturer
P5200 AccessRunner™ ADSL-USB Modem Device Set Conexant
Conexant Systems Conexant
P5200 Datasheet PDF : 56 Pages
First Prev 41 42 43 44 45 46 47 48 49 50 Next Last
AccessRunner ADSL-USB Modem Device Set Data Sheet
4.1.5 Enumeration
The enumeration process consists of the following steps:
1. Get device descriptor. The host requests and reads the device descriptor to determine maximum packet size.
2. Set address. The host sends the function address in a data packet using function endpoint 0. Device firmware interprets
this data.
3. Get device descriptor. The host requests and reads the device descriptor to determine such information as device class,
USB Specification compliance level, maximum packet size for endpoint 0, vendor id, product id. Etc.
4. Get configuration descriptor. The host requests and reads the device configuration descriptor to determine such
information as the number of interfaces and endpoints; endpoint transfer type, packet size, and direction; power source
;maximum power; etc. When the host requests the configuration descriptor, all related interface and endpoint descriptors
are returned.
5. Set configuration. The host assigns a configuration value to the device to establish the current configuration.
4.1.6 Endpoint Pairs
Data transfers with the host are made to/from endpoint pairs on the USB module. The five function endpoint pairs are listed in
Table 4-5.
Endpoint Pair
Function Endpoint 0
Function Endpoint 1
Function Endpoint 2
Function Endpoint 3
Function Endpoint 4
Table 4-5. Endpoint Pairs
Max. Packet Size
Max. Packet Size
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
64 bytes
USB Data Transfer Types
Control
Bulk
Bulk
Bulk
Bulk
4.1.7 Language ID Table
See Language ID data in Table 4-6.
Offset
Field
0
bLength
1
bDescriptorType
2
Size
1
1
2
Table 4-6. Language ID Table
Value
Default
(Hex.)
Description
Number
Constant
Number
04
03
0409
Size of this descriptor in bytes.
INTERFACE Descriptor Type.
4.1.8 Manufacturer String Table
See Manufacturer String data in Table 4-7.
Table 4-7. Manufacturer String Table
Offset
Field
0
bLength
1
bDescriptorType
2
Size
1
1
2
Value
Number
Constant
Default
(Hex.)
04
03
00
'-'
Description
Size of this descriptor in bytes.
INTERFACE Descriptor Type.
Manufacturer string, in unicode
4-6
Conexant
100427B
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]