GRM219B31H105MA73 View Datasheet(PDF) - Murata Manufacturing

Part Name

Description

Manufacturer

GRM219B31H105MA73

Chip Multilayer Ceramic Capacitors for General Purpose

Murata Manufacturing 

ｯﾌﾟ詰め状態

(単位：mm)

4. Part of the leader and part of the vacant section are attached as follows.

The sprocket holes are to the right as the tape is pulled toward the user.

Tail vacant Section Chip-mounting Unit Leader vacant Section

Leader Unit

(Top Tape only)

160 min.

190 min.

210 min.

Direction

of Feed

5. Accumulate tolerance of sprocket holes pitch = +/-0.3mm/10 pitch

6. Chip in the tape is enclosed as shown in 2.Dimensions of Tape.

7. The top tape and carrier tape are not attached at the end of the tape for a minimum of 5 pitches.

8. There are no jointing for top tape and bottom tape.

9. There are no fuzz in the cavity.

10. Break down force of top tape : 5N min.

1 ﾁｯﾌﾟ詰め状態

Break down force of bottom tape : 5N mi(n単. (O位n：lmyma)bottom tape existence )

11. Reel is made by resin and appeaser and dimension is shown in 3.Dimensions of Reel.

　There are possibly to change the material and dimension due to some impairment.

12. Peeling off force : 0.1N to 0.6N in the direction as shown below.

165° to 180°

Top tape

13. Label that show the customer parts number, our parts number, our company name, inspection

number and quantity, will be put in outside of reel.

GRM219B31H105MA73-01A

　

Share Link: