2.4MM SERIES
2.4mm Interface at a Glance
The 2.4mm connector was developed for use to 50 GHz. This connector series uses a thick outer wall to eliminate the
fragility seen in SMA and 2.92mm connectors. The female socket is also strengthened to ensure reliable mating. The
2.4mm series mates with SMA, 3.5mm and 2.92mm connectors with adapters and can mate with the 1.85mm series
without adapters.
Electrical Specifications
Impedance
Frequency
VSWR
Insertion Loss
Shielding Effectiveness
50Ω
50 GHz
1.03 + .005 f
.04 √ f
≥ 100 dB
Mechanical Specifications
Mating Cycles
Recommended Torque
Inter-mate ability
500
5 - 7 in - lbs
1.85mm
Environmental Specifications
Temperature Rating
Corrosion (Salt Spray)
Vibration
Shock
Thermal Shock
Moisture Resistance
Barometric Pressure (Altitude)
-65°C to +165°C
MIL-STD-202, Method 101, Condition B
MIL-STD-202, Method 204, Condition D, 20 Gs
MIL-STD-202, Method 213, Condition I, 100 Gs
MIL-STD-202, Method 107. Cond. B, -65°C to +125°C
MIL-STD-202, Method 106, Less Step 7B
MIL-STD-202, Method 105, Condition C, 70k Ft.
Note: Specifications, dimensions and images are typical for the series and may vary by part number
www.svmicrowave.com | 561.840.1800
4422