Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

6N137 查看數據表(PDF) - Broadcom Corporation

零件编号产品描述 (功能)生产厂家
6N137 High CMR, High Speed TTL Compatible Optocouplers Broadcom
Broadcom Corporation Broadcom
6N137 Datasheet PDF : 30 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-
0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-
2630, HCPL-2631, HCPL-4661 Data Sheet
Package Characteristics
High CMR, High Speed TTL Compatible Optocouplers
All Typicals at TA = 25°C.
Parameter
Sym.
Package
Test
Min. Typ. Max. Units Conditions Figure Note
Input-Output Insulation
II-Oa
Single 8-Pin DIP
Single SO-8
1
µA 45% RH, t = 5s,
VI-O = 3 kVdc,
TA = 25°C
Input-Output Momentary With-
stand Voltaged
VISO 8-Pin DIP, SO-8 3750
Widebody
5000 —
OPT 020f
5000 —
— Vrms RH 50%,
t = 1 min,
TA = 25°C
Input-Output Resistance
RI-O 8-Pin DIP, SO-8 —
1012
VI-O = 500 Vdc,
Widebody
1012 1013
VI-O = 500 Vdc,
TA = 25°C
1011
VI-O = 500 Vdc,
TA = 100°C
Input-Output Capacitance
CI-O 8-Pin DIP, SO-8 —
Widebody
0.6
0.5
0.6
pF f = 1 MHz,
TA = 25°C
Input-Input Insulation Leakage
Current
II-I
Dual Channel
— 0.005 —
µA RH 45%, t = 5s,
VI-I = 500V
Resistance (Input-Input)
RI-I
Dual Channel
1011
RH 45%, t = 5s,
VI-I = 500V
Capacitance (Input-Input)
CI-I Dual 8-Pin DIP —
0.03
Dual SO-8
0.25
pF f = 1 MHz
a. JEDEC registered data for the 6N137. The JEDEC Registration specifies 0°C to 70°C. Broadcom specifies –40°C to 85°C.
b, c
b, c
b, e
b, g, h
b, g, h
i
i
i
b. Device considered a two-terminal device: pins 1, 2, 3, and 4 shorted together, and pins 5, 6, 7, and 8 shorted together.
c. In accordance with UL1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 4500 Vrms for one second (leakage
detection current limit, II-O ≤ 5 µA). This test is performed before the 100% production test for partial discharge (Method b) shown in the IEC/
EN/DIN EN 60747-5-5 Insulation Characteristics Table, if applicable.
d. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-5 Insulation Characteristics Table (if applicable), your
equipment level safety specification or Broadcom Application Note 1074, Optocoupler Input-Output Endurance Voltage.
e. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 6000 Vrms for one second (leakage
detection current limit, II-O ≤ 5 µA). This test is performed before the 100% production test for partial discharge (Method b) shown in the IEC/
EN/DIN EN 60747-5-5 Insulation Characteristics Table, if applicable.
f. For 6N137, HCPL-2601/2611/2630/2631/4661 only.
g. Each channel.
h. Measured between the LED anode and cathode shorted together and pins 5 through 8 shorted together. For dual channel products only.
i. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. For dual channel products only.
Broadcom
AV02-0940EN
20
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]