3KP110A View Datasheet(PDF) - GOOD-ARK

Part Name

Description

Manufacturer

3KP110A

Transient Voltage Suppressors

GOOD-ARK 

3KP5.0 thru 3KP220CA

Transient Voltage Suppressors

Peak Pulse Power 3000W Stand-off Voltage 5.0 to 220V

Features

Plastic package has Underwriters Laboratory Flammability

Classification 94V-O

Glass passivated chip junction in P-600/R-6 package

3000W Peak Pulse Power capability at on 10/1000uS waveform

Excellent clamping capability

Low zener impedance

Repetition rate(Duty Cycle):.05%

Fast response time: typically less than 1.0 ps from 0 volts to BV

min

Typical IR less than 1uA above 10V

High temperature soldering guaranteed: 260oC/10 seconds/

.375",(9.5mm) lead length/5lbs., (2.3kg) tension

Mechanical Data

Case: JEDEC P600 molded plastic

Terminals: Axial leads, solderable per MIL-STD-750, Method

2026

Polarity: Color band denoted cathode except Bipolar

Mounting Position: Any

Weight: 0.07 ounce, 2.1 grams

For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP220

Electrical characteristics apply in both directions.

Maximum Ratings and Thermal Characteristics

Ratings at 25oC ambient temperature unless otherwise specified.

Parameter

Symbol

Value

Unit

Peak Power Dissipation at TA=25oC, TP=1ms (1)

Peak pulse current with a 10/1000us waveform (1)

Steady state power dissipation

at TL=75oC, lead lengths 0.375" (9.5mm) (2)

Peak forward surge current, 8.3ms single half sine-wave (3)

Operating junction and storage temperature range

PPPM

IPPM

PM(AV)

IFSM

TJ, TSTG

Minimum 3000

See Next Table

8.0

250

-55 to +175

W

A

W

Amps

oC

Notes:

1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2

2. Mounted on copper pad area of 0.79 x 0.79" (20 x 20 mm) per Fig. 5.

3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.

606

Share Link: