LP3982 View Datasheet(PDF) - Lowpower Semiconductor inc
Part Name
Description
Manufacturer
LP3982 Datasheet PDF : 8 Pages
| |||
Preliminary Datasheet
LP3982
300mA,Ultra-low noise, Small Package
Ultra-Fast CMOS LDO Regulator
General Description
The The LP3982 is designed for portable RF and
wireless applications with demanding performance
and space requirements. The LP3982 performance
is optimized for battery-powered systems to deliver
ultra low noise and low quiescent current. A noise
bypass pin is available for further reduction of
output noise. Regulator ground current increases
only slightly in dropout, further prolonging the
battery life. The LP3982 also works with low-ESR
ceramic capacitors, reducing the amount of board
space necessary for power applications, critical in
hand-held wireless devices. The LP3982 consumes
less than 0.01µA in shutdown mode and has fast
turn-on time less than 50µs. The other features
include ultra low dropout voltage, high output
accuracy, current limiting protection, and high
ripple rejection ratio. Available in the 5-lead of
SC-70 packages.
Ordering Information
LP3982 - □ □ □ □ □
F: Pb-Free
Package Type
J5: SC-70
Output Voltage Type
15: 1.5V
18: 1.8V
25: 2.5V
28: 2.8V
30: 3.0V
33: 3.3V
Typical Application Circuit
Features
Ultra-Low-Noise for RF Application
2V- 6V Input Voltage Range
Low Dropout : 220mV @ 300mA
1.2V, 1.5V, 1.8V, 2.5V, 2.8V 3.0V and 3.3V Fixed
300mA Output Current, 550A Peak Current
High PSSR:-80dB at 1KHz
< 0.01uA Standby Current When Shutdown
Available in SC-70-5 Package
TTL-Logic-Controlled Shutdown Input
Ultra-Fast Response in Line/Load transient
Current Limiting and Thermal Shutdown
Protection
Quick start-up (typically 50uS)
Applications
Portable Media Players/MP3 players
Cellular and Smart mobile phone
LCD
DSC Sensor
Wireless Card
Pin Configurations
SC-70(Top View)
Marking Information
Please see website.
LP3982 – Ver. 1.0 Datasheet Dec.-2006
Page 1 of 8
|
|
Share Link: 