DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ST1-DC5V(2012) View Datasheet(PDF) - Panasonic Corporation

Part Name
Description
Manufacturer
ST1-DC5V
(Rev.:2012)
Panasonic
Panasonic Corporation Panasonic
ST1-DC5V Datasheet PDF : 4 Pages
1 2 3 4
ST
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Item
Arrangement
Contact material
Contact resistance (Initial)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Minimum operating power
Nominal operating power
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
(at 25°C, 50% relative humidity)
Breakdown voltage
(Initial)
Between open contacts
Between contact sets
Between contact and coil
Surge breakdown voltage (Initial)*2
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Mechanical
characteristics
Expected life
Conditions
Unit weight
Temperature rise (coil) (at 60°C 140°F)
Shock resistance
Vibration resistance
Mechanical
Electrical
Functional
Destructive
Functional
Destructive
Conditions for operation, transport and storage*3
Max. operating speed
Specifications
1 Form A 1 Form B, 2 Form A
Au-flashed AgSnO2 type
Max. 30 m(By voltage drop 6 V DC 1A)
3,040 VA, 150 W
380 V AC, 250 V DC
8A
150mW (Single side stable, 2 coil latching)
240mW (Single side stable, 2 coil latching)
100 mA 5V DC
Min. 1,000M(at 500V DC)
Measurement at same location as “Breakdown voltage” section.
1,200 Vrms for 1 min. (Detection current: 10 mA)
2,000 Vrms for 1 min. (Detection current: 10 mA)
3,750 Vrms for 1 min. (Detection current: 10 mA)
6,000 V (Between contact and coil)
Max. 15 ms [Max. 15 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 10 ms [Max. 15 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Max. 55°C
(By resistive method, nominal voltage applied to the coil; contact carrying current: 8A.)
Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 3 mm
Min. 107 (at 180 times/min.)
Min. 105 (8 A 250 V AC resistive) (ON : OFF = 1 s : 5 s)
Ambient temperature: –40°C to +60°C –40°F to +140°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
30 cps
Approx. 10g .353 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
1. Max. switching power
2. Coil temperature rise
10
AC resistive load
5
AC inductive
load
(cosϕ=0.4)
2
DC resistive
load
1
0.5
DC inductive
load
(L/R=40ms)
0.2
0 20
50 100 200 300 600 1000
Voltage, V
100
90
80
70
60 Contact current 8A
50
40
0A
30
20
10
0
0.2 0.4 0.6 0.8 1.0 1.2
Coil operating power, W
3. Influence of adjacent mounting
40
30
20
10
Drop-out voltage
0
Pick-up voltage
-10
-20
-30
-40
5
10
15
20
Inter-relay distance, mm
ASCTB210E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]