Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

1N6296A_ View Datasheet(PDF) - Shenzhen Luguang Electronic Technology Co., Ltd

Part NameDescriptionManufacturer
1N6296A_ Transient Voltage Suppressor LUGUANG
Shenzhen Luguang Electronic Technology Co., Ltd LUGUANG
1N6296A_ Datasheet PDF : 4 Pages
1 2 3 4
1N6267-1N6303A
Transient Voltage Suppressor
BREAKDOWN VOLTAGE: 6.8 --- 200 V
PEAK PULSE POWER: 1500 W
Features
Plastic package has Underwriters Laboratory
Flam m ability Classification 94V-0
Glass passivated junction
1500W peak pulse power capability with a 10/1000μs
waveform , repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response tim e: typically les s than 1.0ps from 0 Volts to
V(BR) for uni-directional and 5.0ns for bi-directional types
For devices with V(BR) 10V,ID are typically les s than 1.0μA
High tem perature soldering guaranteed:265 / 10 seconds,
0.375"(9.5mm) lead length, 51bs. (2.3kg) tension
Mechanical Data
Case:JEDEC DO-201AE, molded plastic
Polarity: Color band denotes positive end
( cathode ) except for bidirectional
Weight: 0.032 ounces, 0.9 grams
Mounting position: Any
DO-201AE
Dimensions in millimeters
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA suffix for types 1N6267 thru types 1N6303A (e.g. 1N6267, 1N6303A).
Electrical characteristics apply in both directions .
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
SYMBOL
VALUE
Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE 1, FIG.1)
Peak pulse current w ith a 10/1000μs w aveform (NOTE 1)
Steady state pow er dissipation at TL=75
fffff lead lengths 0.375"(9.5mm) (NOTE 2)
PPPM
IPPM
PM(AV)
Minimum 1500
SEE TABLE 1
6.5
Peak forw ard surge current, 8.3ms single half
ffffsine-w ave superimposed on rated load (JEDEC Method) (NOTE 3)
IFSM
200.0
Maximum instantaneous forw ard voltage at 100 A for unidirectional only (NOTE 4)
VF
3.5/5.0
Typical thermal resistance junction-to-lead
RθJL
20
Typical thermal resistance junction-to-ambient
RθJA
75
Operating junction and storage temperature range
TJ, TSTG
-50---+175
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2
(2) Mounted on copper pad area of 1.6" x 1.6"(40 x40mm2) per Fig. 5
(3) Measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR) 200V, and VF=5.0 Volt max. for devices of V(BR) >200V
UNIT
W
A
W
A
V
/W
/W
http://www.luguang.cn
mail:lge@luguang.cn
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]