General Purpose Capacitors
◙ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable
against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N2 within oven are recommended.
4℃/ sec max
Fig. 6 Recommended IR reflow soldering profile for SMT process
with SnAgCu series solder paste.
Over 60sec at least by
Fig. 7 Recommended wave soldering profile for SMT process
with SnAgCu series solder.
Page 16 of 16