MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
PART
MAX11200EVKIT+
MAX11206EVKIT+
MAX11209EVKIT+
MAX11210EVKIT+
MAX11213EVKIT+
DESIGNATION
U1
EV Kit-Specific Component List
DESCRIPTION
24-bit single-channel ADC (16 QSOP)
Maxim MAX11200EEE+
20-bit single-channel ADC (16 QSOP)
Maxim MAX11206EEE+
18-bit single-channel ADC (16 QSOP)
Maxim MAX11209EEE+
24-bit single-channel ADC (16 QSOP)
Maxim MAX11210EEE+
16-bit single-channel ADC (16 QSOP)
Maxim MAX11213EEE+
Component Suppliers
SUPPLIER
PHONE
WEBSITE
HALO Electronics, Inc.
650-903-3800
www.haloelectronics.com
Hong Kong X’tals Ltd.
852-35112388
www.hongkongcrystal.com
Murata Electronics North America, Inc.
770-436-1300
www.murata-northamerica.com
Note: Indicate that you are using the MAX11200, MAX11206, MAX11209, MAX11210, or MAX11213 when contacting these
component suppliers.
MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Files
FILE
INSTALL.EXE
11200_06_09_10_13.EXE
UNINST.INI
DESCRIPTION
Installs the EV kit files on your computer
Application program
Uninstalls the EV kit software
Quick Start
Recommended Equipment
• MAX11200, MAX11206, MAX11209, MAX11210, or
MAX11213 EV kit (USB A-to-B cable included)
• Windows XP, Windows Vista, or Windows 7 PC with
a spare USB port
• High-precision digital voltmeter (DVM)
Refer to the MAX11200/MAX11210, MAX11203/
MAX11213, MAX11206/MAX11207, and MAX11209/
MAX11211 IC data sheets while using this EV kit for
detailed descriptions of the device features.
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under-
lined refers to items from the Windows operating system.
Procedure
The EV kits are fully assembled and tested. Follow
the steps below to verify board operation before
exercising the full features of the MAX11200 family of data
converters:
1) Verify that all the jumpers are set in their default
positions (see Table 3).
2) Visit www.maxim-ic.com/evkitsoftware to down-
load the latest version of the EV kit software,
11200_06_09_10_13Rxx.ZIP.
3) Install the evaluation software on your computer
by running the INSTALL.EXE program. The pro-
gram files are copied and icons are created in the
Windows Start | Programs menu.
4) Connect the USB cable from the PC to the EV kit
board.
_______________________________________________________________________________________ 3