DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M41T56M6_04 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
Manufacturer
M41T56M6_04 Datasheet PDF : 25 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
M41T56
SUMMARY DESCRIPTION
The M41T56 TIMEKEEPER® is a low power, 512-
bit static CMOS RAM organized as 64 words by 8
bits. A built-in 32,768Hz oscillator (external crystal
controlled) and the first 8 bytes of the RAM are
used for the clock/calendar function and are con-
figured in binary coded decimal (BCD) format. Ad-
dresses and data are transferred serially via a two-
line, bi-directional bus. The built-in address regis-
ter is incremented automatically after each WRITE
or READ data byte.
The M41T56 clock has a built-in power sense cir-
cuit which detects power failures and automatical-
ly switches to the battery supply during power
failures. The energy needed to sustain the RAM
and clock operations can be supplied from a small
lithium coin cell.
Typical data retention time is in excess of 10 years
with a 50mAh, 3V lithium cell. The M41T56 is sup-
plied in an 8-lead Plastic SOIC package or a 28-
lead SNAPHAT® package.
The 28-pin, 330mil SOIC provides sockets with
gold plated contacts at both ends for direct con-
nection to a separate SNAPHAT housing contain-
ing the battery and crystal. The unique design
allows the SNAPHAT battery package to be
mounted on top of the SOIC package after the
completion of the surface mount process. Inser-
tion of the SNAPHAT housing after reflow pre-
vents potential battery and crystal damage due to
the high temperatures required for device surface-
mounting. The SNAPHAT housing is keyed to pre-
vent reverse insertion. The SOIC and battery/crys-
tal packages are shipped separately in plastic anti-
static tubes or in Tape & Reel form.
For the 28-lead SOIC, the battery/crystal package
(e.g., SNAPHAT) part number is “M4Txx-
BR12SH” (see Table 16., page 22).
Caution: Do not place the SNAPHAT battery/crys-
tal package “M4Txx-BR12SH” in conductive foam
as this will drain the lithium button-cell battery.
Figure 3. Logic Diagram
VCC VBAT
OSCI
SCL
M41T56
OSCO
SDA
FT/OUT
VSS
AI02304B
Table 1. Signal Names
OSCI
Oscillator Input
OCSO
Oscillator Output
FT/OUT
Frequency Test / Output Driver
(Open Drain)
SDA
Serial Data Address Input / Output
SCL
Serial Clock
VBAT
Battery Supply Voltage
VCC
Supply Voltage
VSS
Ground
4/24
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]