DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

74ABT125(2010) View Datasheet(PDF) - NXP Semiconductors.

Part Name
Description
Manufacturer
74ABT125
(Rev.:2010)
NXP
NXP Semiconductors. NXP
74ABT125 Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NXP Semiconductors
74ABT125
Quad buffer; 3-state
9. Static characteristics
Table 6.
Symbol
VIK
VOH
VOL
II
IOFF
IO(pu/pd)
IOZ
ILO
IO
ICC
ΔICC
CI
CO
Static characteristics
Parameter
Conditions
input clamping voltage VCC = 4.5 V; IIK = 18 mA
HIGH-level output
voltage
VI = VIL or VIH
VCC = 4.5 V; IOH = 3 mA
VCC = 5.0 V; IOH = 3 mA
VCC = 4.5 V; IOH = 32 mA
LOW-level output
voltage
VCC = 4.5 V; IOL = 64 mA;
VI = VIL or VIH
input leakage current VCC = 5.5 V; VI = GND or 5.5 V
power-off leakage
current
VCC = 0.0 V; VI or VO 4.5 V
power-up/power-down VCC = 2.1 V; VO = 0.5 V;
output current
VI = GND or VCC; OE = don’t care
OFF-state output
current
VCC = 5.5 V; VI = VIL or VIH
VO = 2.7 V
VO = 0.5 V
output leakage current HIGH-state; VO = 5.5 V;
VCC = 5.5 V; VI = GND or VCC
output current
VCC = 5.5 V; VO = 2.5 V
supply current
VCC = 5.5 V; VI = GND or VCC
outputs HIGH-state
outputs LOW-state
outputs disabled
additional supply
current
per control pin; VCC = 5.5 V;
one control input at 3.4 V, other
inputs at VCC or GND
outputs enabled
outputs disabled
one enable input at 3.4 V and other
inputs at VCC or GND; outputs
disabled
input capacitance
output capacitance
VI = 0 V or VCC
outputs disabled; VO = 0 V or VCC
25 °C
Min Typ
- 0.9
40 °C to +85 °C Unit
Max Min Max
1.2
-
1.2 V
2.5 2.9 -
2.5
3.0 3.4 -
3.0
2.0 2.4 -
2.0
- 0.35 0.55
-
- ±0.01 ±1.0
-
- ±5.0 ±100 -
[1] - ±5.0 ±50
-
-V
-V
-V
0.55 V
±1.0 μA
±100 μA
±50 μA
- 1.0 50
-
- 1.0 50
-
- 5.0 50
-
[2] 50 100 180 50
50 μA
50 μA
50 μA
180 mA
- 65 250
-
- 12 15
-
- 65 250
-
[3]
250 μA
30 mA
50 μA
- 0.5 1.5
-
- 50 250
-
- 0.5 1.5
-
1.5 mA
250 mA
1.5 mA
-
4
-
-
-
7
-
-
- pF
- pF
[1] This parameter is valid for any VCC between 0 V and 2.1 V, with a transition time of up to 10 ms. From VCC = 2.1 V to VCC = 5 V ± 10 %,
a transition time of up to 100 μs is permitted.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
[3] This is the increase in supply current for each input at 3.4 V.
74ABT125_4
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 04 — 27 April 2010
© NXP B.V. 2010. All rights reserved.
4 of 15
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]