MBRS240LT3 View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
MBRS240LT3 Datasheet PDF : 28 Pages
| |||
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADP2300/ADP2301
BST 1 ADP2300/ 6 SW
ADP2301
GND 2
5 VIN
TOP VIEW
(Not to Scale)
FB 3
4 EN
Figure 3. Pin Configuration
Table 4. Pin Function Descriptions
Pin No. Mnemonic Description
1
BST
Boost Supply for the High-Side MOSFET Driver. A 0.1 μF capacitor is connected between the SW and BST pins
to form a floating supply to drive the gate of the MOSFET switch above the VIN supply voltage.
2
GND
Ground. Connect this pin to the ground plane.
3
FB
Feedback Voltage Sense Input. Connect this pin to a resistive divider from VOUT. Set the voltage to 0.8 V for a
desired VOUT.
4
EN
Output Enable. Pull this pin high to enable the output. Pull this pin low to disable the output. This pin can
also be used as a programmable UVLO input. This pin has a 1.2 μA pull-down current to GND.
5
VIN
Power Input. Connect to the input power source with a ceramic bypass capacitor to GND directly from this pin.
6
SW
Switch Node Output. Connect an inductor to VOUT and a catch diode to GND from this pin.
Rev. 0 | Page 5 of 28
|
|
Share Link: 