9FGV0631C View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
Manufacturer
9FGV0631C Datasheet PDF : 16 Pages
| |||
9FGV0631C DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 9FGV0631C. These ratings, which are standard
values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other
conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
VDDxx
Applies to all VDD pins
Input Voltage
VIN
Input High Voltage, SMBus VIHSMB
Storage Temperature
Ts
SMBus clock and data pins
Junction Temperature
Tj
Input ESD protection ESD prot
Human Body Model
1Guaranteed by design and characterization, not 100% tested in production.
2 Operation under these conditions is neither implied nor guaranteed.
3 Not to exceed 2.5V.
MIN
-0.5
-0.5
-65
2000
TYP
MAX
2.5
VDD+0.5V
3.6V
150
125
UNITS
V
V
V
°C
°C
V
NOTES
1,2
1, 3
1
1
1
1
Electrical Characteristics–Current Consumption
TA = TAMB; Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS NOTES
Operating Supply Current
IDDAOP
IDDOP
VDDA, All outputs active @100MHz
All VDD, except VDDA and VDDIO, All outputs
active @100MHz
6.1
9
mA
10.5 15 mA
IDDIOOP
VDDIO, All outputs active @100MHz
22 30 mA
Wake-on-LAN Current
(CKPWRGD_PD# = '0'
Byte 3, bit 5 = '1')
IDDAPD
IDDPD
IDDIOPD
VDDA, DIF outputs off, REF output running
All VDD, except VDDA and VDDIO,
DIF outputs off, REF output running
VDDIO, DIF outputs off, REF output running
0.4
1
mA
2
5.5
8
mA
2
0.04 0.1 mA
2
Powerdown Current
IDDAPD
VDDA, all outputs off
0.4
1
mA
(CKPWRGD_PD# = '0'
IDDPD All VDD, except VDDA and VDDIO, all outputs off
0.6
1
mA
Byte 3, bit 5 = '0')
IDDIOPD
VDDIO, all outputs off
0.0003 0.1 mA
1 Guaranteed by design and characterization, not 100% tested in production.
2 This is the current required to have the REF output running in Wake-on-LAN mode (Byte 3, bit 5 = 1)
Electrical Characteristics–DIF Output Duty Cycle, Jitter, and Skew Characteristics
TA = TAMB; Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS NOTES
Duty Cycle
tDC
Measured differentially, PLL Mode
Skew, Output to Output
tsk3
Averaging on, VT = 50%
Jitter, Cycle to cycle
tjcyc-cyc
1Guaranteed by design and characterization, not 100% tested in production.
2 Measured from differential waveform
45 49.9 55
%
1,2
37 50 ps 1,2
12 50 ps 1,2
JUNE 23, 2017
5
6-OUTPUT VERY LOW-POWER PCIE GEN 1-2-3-4 CLOCK GENERATOR
|
|
Share Link: 