DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MC-458CB646 View Datasheet(PDF) - NEC => Renesas Technology

Part Name
Description
Manufacturer
MC-458CB646 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC-458CB646
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
[MC-458CB646F]
Parameter
Symbol
Test condition
Grade MIN. MAX. Unit Notes
Operating current
ICC1 Burst length = 1
tRC tRC(MIN.), IO = 0 mA
/CAS latency = 2 -A80
-A10
640 mA 1
560
/CAS latency = 3 -A80
680
-A10
600
Precharge standby current in ICC2P CKE VIL(MAX.), tCK = 15 ns
power down mode
ICC2PS CKE VIL(MAX.), tCK =
Precharge standby current in ICC2N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
8 mA
4
160 mA
ICC2NS CKE VIH(MIN.), tCK =
48
Input signals are stable.
Active standby current in
power down mode
Active standby current in
non power down mode
ICC3P CKE VIL(MAX.), tCK = 15 ns
ICC3PS CKE VIL(MAX.), tCK =
ICC3N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
Input signals are changed one time during 30 ns.
40 mA
32
200 mA
ICC3NS CKE VIH(MIN.), tCK =
80
Input signals are stable.
Operating current
(Burst mode)
CBR (Auto) refresh current
Self refresh current
Input leakage current
Output leakage current
High level output voltage
Low level output voltage
ICC4 tCK tCK(MIN.)
/CAS latency = 2 -A80
840 mA 2
IO = 0 mA
-A10
640
/CAS latency = 3 -A80
1,000
-A10
840
ICC5 tRC tRC(MIN.)
/CAS latency = 2 -A80
1,040 mA 3
-A10
/CAS latency = 3 -A80
1,080
-A10
ICC6 CKE 0.2 V
8 mA
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
– 8 + 8 µA
IO(L) DOUT is disabled, VO = 0 to 3.6 V
– 1.5 + 1.5 µA
VOH IO = – 4.0 mA
2.4
V
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet M13049EJ5V0DS00
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]