Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM158QML View Datasheet(PDF) - Texas Instruments

Part NameLM158QML TI
Texas Instruments TI
DescriptionLow Power Dual Operational Amplifiers
LM158QML Datasheet PDF : 30 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LM158QML Low Power Dual Operational Amplifiers
Check for Samples: LM158QML
2 Available with Radiation Specification
– High Dose Rate 100 krad(Si)
– ELDRS Free 100 krad(Si)
• Internally Frequency Compensated for Unity
• Large DC Voltage Gain: 100 dB
• Wide Bandwidth (Unity Gain): 1 MH
z(Temperature Compensated)
• Wide Power Supply Range:
– Single Supply: 3V to 32V
– Or Dual Supplies: ±1.5V to ±16V
• Very Low Supply Current Drain (500 μA)
Essentially Independent of Supply Voltage
• Low Input Offset Voltage: 2 mV
• Input Common-mode Voltage Range Includes
• Differential Input Voltage Range Equal to the
Power Supply Voltage
• Large Output Voltage Swing: 0V to V+ 1.5V
• In the Linear Mode the Input Common-Mode
Voltage Range Includes Ground and the Output
Voltage can also Swing to Ground, even though
Operated from only a Single Power Supply
• The Unity Gain Cross Frequency is Temperature
• The Input Bias Current is also Temperature
• Two Internally Compensated Op Amps
• Eliminates Need for Dual Supplies
• Allows Direct Sensing Near Gnd and VO also
Goes to Gnd
• Compatible with all Forms of Logic
• Power Drain Suitable for Battery Operation
The LM158 series consists of two independent, high
gain, internally frequency compensated operational
amplifiers which were designed specifically to operate
from a single power supply over a wide range of
voltages. Operation from split power supplies is also
possible and the low power supply current drain is
independent of the magnitude of the power supply
Application areas include transducer amplifiers, dc
gain blocks and all the conventional op amp circuits
which now can be more easily implemented in single
power supply systems. For example, the LM158
series can be directly operated off of the standard
+5V power supply voltage which is used in digital
systems and will easily provide the required interface
electronics without requiring the additional ±15V
power supplies.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated
Direct download click here
HOME 'LM158QML' Search
Share Link : 
한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]