HM5264165F/HM5264805F/HM5264405F-75/A60/B60
Burst stop command at burst write: The burst stop command (BST command) is used to stop data input
during a full-page burst write. No data is written in the same clock as the BST command, and in subsequent
clocks. In addition, the BST command is only valid during full-page burst mode, and is illegal with burst
lengths of 1, 2, 4 and 8. And an interval of tDPL is required between last data-in and the next precharge
command.
Burst Length = full page
CLK
Command
DQ (input)
BST
in
in
t DPL
I BSW = 0 clock
PRE/PALL
Data Sheet E0135H10
27