MC-4516DA726F View Datasheet(PDF) - NEC => Renesas Technology

Part Name

Description

Manufacturer

MC-4516DA726F

16 M-WORD BY 72-BIT SYNCHRONOUS DYNAMIC RAM MODULE REGISTERED TYPE

NEC => Renesas Technology 

MC-4516DA726

5 [MC-4516DA726LF]

Parameter

Symbol

Test condition

MIN. MAX. Unit Notes

Operating current

ICC1 Burst length = 1, tRC ≥ tRC(MIN.) ,

IO = 0 mA

/CAS latency = 2

-A80

-A10

1,650 mA 1

1,470

/CAS latency = 3 -A80

1,740

-A10

1,560

Precharge standby current in ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns

268 mA

power down mode

ICC2PS CKE ≤ VIL(MAX.), tCK = ∞

26

Precharge standby current in ICC2N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),

non power down mode

Input signals are changed one time during 30 ns.

ICC2NS CKE ≥ VIH (MIN.), tCK = ∞,

Input signals are stable.

Active standby current in

ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns

610 mA

108

340 mA

power down mode

ICC3PS CKE ≤ VIL(MAX.), tCK = ∞

72

Active standby current in

ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),

700 mA

non power down mode

Input signals are changed one time during 30 ns.

Operating current

ICC3NS CKE ≥ VIH (MIN.), tCK = ∞,

Input signals are stable.

ICC4 tCK ≥ tCK(MIN.) , IO = 0 mA

/CAS latency = 2 -A80

270

1,920 mA 2

(Burst mode)

-A10

1,560

/CAS latency = 3 -A80

2,190

-A10

1,920

CBR (Auto) refresh current ICC5 tRC ≥ tRC(MIN.)

/CAS latency = 2 -A80

2,640 mA 3

-A10

2,640

/CAS latency = 3 -A80

2,730

-A10

2,730

Self refresh current

ICC6 CKE ≤ 0.2 V

268 mA

Input leakage current

II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V

– 10 + 10 µA

Output leakage current

IO(L) DOUT is disabled, VO = 0 to 3.6 V

– 1.5 + 1.5 µA

High level output voltage

VOH IO = – 4.0 mA

2.4

V

Low level output voltage

VOL IO = + 4.0 mA

0.4 V

Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).

2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).

3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).

Data Sheet M13203EJ3V0DS00

7

Share Link: