Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

NT3960 View Datasheet(PDF) - Novatek Microelectronics

Part NameDescriptionManufacturer
NT3960 TFT LCD Source Driver Novatek
Novatek Microelectronics Novatek
NT3960 Datasheet PDF : 20 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NT3960
TFT LCD Source Driver
Pad Description (continued)
Pad No.
Designation I/O
Description
41 ~ 43
POL
I Polarity select for the dot-inversion control. Available at the rising edge of LD
“POL” value is latched at the rising edge of “LD” to control the polarity of the even or
odd outputs. “POL=1” represents that the next-line odd outputs are of positive
polarity with a voltage output range from V1~V5, and even outputs are of negative
polarity with a voltage output range from V6 to V10. On the other hand, if LD gets
low level “POL”, odd outputs are of negative polarity and even outputs are of
positive.
POL=1: Odd outputs range from V1 ~ V5
Even outputs range from V6 ~ V10
POL=0: Odd outputs range from V6 ~ V10
Even outputs range from V1 ~ V5
*Remark: Pay attention to the polarity when selecting the 300-channel function.
The polarity of OUT160 ~OUT309 must be changed. (The polarity needs to
be continuous, +, -, +, -, +, -, etc. If you don’t change the polarity, it will not be
continuous between OUT150 and OUT160 when selecting the 300-channel
function. )
11~15, 107~111, AVDD
I
Power supply for analog circuits ; 6.5 ~ 10V
171~175
16 ~ 20, 72 ~ 76, AVSS
I Ground pins for analog circuits
166 ~ 170
26 ~ 30, 156 ~ 160 Vcc
I Power supply for digital circuits
21 ~ 25, 38 ~ 40,
GND
I Ground pins for digital circuits
161 ~ 165
66 ~ 68
Test
- For testing
5~7, 500~498 PASS1~3 - The internal connected paths
179~181,188~186 PASS4~6
501, 502
Align Mark - For COG assembly alignment
1~4, 182 ~ 185,
NC
- No connected
56, 121, 131, 141,
151
4
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]