DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M1A3P1000-1PG208M View Datasheet(PDF) - Actel Corporation

Part Name
Description
Manufacturer
M1A3P1000-1PG208M Datasheet PDF : 181 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Military ProASIC3/EL Device Family Overview
Flash*Freeze Technology††
Military ProASIC3EL devices offer Actel's proven Flash*Freeze technology, which enables designers
to instantaneously shut off dynamic power consumption while retaining all SRAM and register
information. Flash*Freeze technology enables the user to quickly (within 1 µs) enter and exit
Flash*Freeze mode by activating the Flash*Freeze (FF) pin while all power supplies are kept at their
original values. In addition, I/Os and global I/Os can still be driven and can be toggling without
impact on power consumption; clocks can still be driven or can be toggling without impact on
power consumption; all core registers and SRAM cells retain their states. I/Os are tristated during
Flash*Freeze mode or can be set to a certain state using weak pull-up or pull-down I/O attribute
configuration. No power is consumed by the I/O banks, clocks, JTAG pins, or PLLs. Flash*Freeze
technology allows the user to switch to active mode on demand, thus simplifying the power
management of the device.
The FF pin (active low) can be routed internally to the core to allow the user's logic to decide when
it is safe to transition to this mode. It is also possible to use the FF pin as a regular I/O if
Flash*Freeze mode usage is not planned, which is advantageous because of the inherent low-
power static and dynamic capabilities of the military ProASIC3EL device. Refer to Figure 1-3 for an
illustration of entering/exiting Flash*Freeze mode.
Flash*Freeze
Mode Control
Actel ProASIC3EL
FPGA
Flash*Freeze Pin
Figure 1-3 • Military ProASIC3EL Flash*Freeze Mode
VersaTiles
The military ProASIC3/EL core consists of VersaTiles, which have been enhanced beyond the
ProASICPLUS® core tiles. The military ProASIC3/EL VersaTile supports the following:
• All 3-input logic functions—LUT-3 equivalent
• Latch with clear or set
• D-flip-flop with clear or set
• Enable D-flip-flop with clear or set
Refer to Figure 1-4 for VersaTile configurations.
LUT-3 Equivalent
X1
X2 LUT-3 Y
X3
D-Flip-Flop with Clear or Set
Data
Y
CLK
D-FF
CLR
Figure 1-4 • VersaTile Configurations
Enable D-Flip-Flop with Clear or Set
Data
Y
CLK
D-FF
Enable
CLR
†† Flash*Freeze technology is not supported for A3P1000.
v1.0
1-5
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]